.. XXX: reference/datamodel and this have quite a few overlaps! .. _bltin-types: ************** Built-in Types ************** The following sections describe the standard types that are built into the interpreter. .. index:: pair: built-in; types The principal built-in types are numerics, sequences, mappings, files, classes, instances and exceptions. Some operations are supported by several object types; in particular, practically all objects can be compared, tested for truth value, and converted to a string (with the :func:`repr` function or the slightly different :func:`str` function). The latter function is implicitly used when an object is written by the :func:`print` function. .. _truth: Truth Value Testing =================== .. index:: statement: if statement: while pair: truth; value pair: Boolean; operations single: false Any object can be tested for truth value, for use in an :keyword:`if` or :keyword:`while` condition or as operand of the Boolean operations below. The following values are considered false: .. index:: single: None (Built-in object) * ``None`` .. index:: single: False (Built-in object) * ``False`` * zero of any numeric type, for example, ``0``, ``0.0``, ``0j``. * any empty sequence, for example, ``''``, ``()``, ``[]``. * any empty mapping, for example, ``{}``. * instances of user-defined classes, if the class defines a :meth:`__bool__` or :meth:`__len__` method, when that method returns the integer zero or :class:`bool` value ``False``. [#]_ .. index:: single: true All other values are considered true --- so objects of many types are always true. .. index:: operator: or operator: and single: False single: True Operations and built-in functions that have a Boolean result always return ``0`` or ``False`` for false and ``1`` or ``True`` for true, unless otherwise stated. (Important exception: the Boolean operations ``or`` and ``and`` always return one of their operands.) .. _boolean: Boolean Operations --- :keyword:`and`, :keyword:`or`, :keyword:`not` ==================================================================== .. index:: pair: Boolean; operations These are the Boolean operations, ordered by ascending priority: +-------------+---------------------------------+-------+ | Operation | Result | Notes | +=============+=================================+=======+ | ``x or y`` | if *x* is false, then *y*, else | \(1) | | | *x* | | +-------------+---------------------------------+-------+ | ``x and y`` | if *x* is false, then *x*, else | \(2) | | | *y* | | +-------------+---------------------------------+-------+ | ``not x`` | if *x* is false, then ``True``, | \(3) | | | else ``False`` | | +-------------+---------------------------------+-------+ .. index:: operator: and operator: or operator: not Notes: (1) This is a short-circuit operator, so it only evaluates the second argument if the first one is :const:`False`. (2) This is a short-circuit operator, so it only evaluates the second argument if the first one is :const:`True`. (3) ``not`` has a lower priority than non-Boolean operators, so ``not a == b`` is interpreted as ``not (a == b)``, and ``a == not b`` is a syntax error. .. _stdcomparisons: Comparisons =========== .. index:: pair: chaining; comparisons There are eight comparison operations in Python. They all have the same priority (which is higher than that of the Boolean operations). Comparisons can be chained arbitrarily; for example, ``x < y <= z`` is equivalent to ``x < y and y <= z``, except that *y* is evaluated only once (but in both cases *z* is not evaluated at all when ``x < y`` is found to be false). .. index:: pair: operator; comparison operator: == operator: < operator: > operator: <= operator: >= operator: != operator: is operator: is not This table summarizes the comparison operations: +------------+-------------------------+ | Operation | Meaning | +============+=========================+ | ``<`` | strictly less than | +------------+-------------------------+ | ``<=`` | less than or equal | +------------+-------------------------+ | ``>`` | strictly greater than | +------------+-------------------------+ | ``>=`` | greater than or equal | +------------+-------------------------+ | ``==`` | equal | +------------+-------------------------+ | ``!=`` | not equal | +------------+-------------------------+ | ``is`` | object identity | +------------+-------------------------+ | ``is not`` | negated object identity | +------------+-------------------------+ .. index:: pair: object; numeric pair: objects; comparing Objects of different types, except different numeric types, never compare equal. Furthermore, some types (for example, file objects) support only a degenerate notion of comparison where any two objects of that type are unequal. The ``<``, ``<=``, ``>`` and ``>=`` operators will raise a :exc:`TypeError` exception when any operand is a complex number, the objects are of different types that cannot be compared, or other cases where there is no defined ordering. .. index:: single: __eq__() (instance method) single: __ne__() (instance method) single: __lt__() (instance method) single: __le__() (instance method) single: __gt__() (instance method) single: __ge__() (instance method) Non-identical instances of a class normally compare as non-equal unless the class defines the :meth:`__eq__` method. Instances of a class cannot be ordered with respect to other instances of the same class, or other types of object, unless the class defines enough of the methods :meth:`__lt__`, :meth:`__le__`, :meth:`__gt__`, and :meth:`__ge__` (in general, :meth:`__lt__` and :meth:`__eq__` are sufficient, if you want the conventional meanings of the comparison operators). The behavior of the :keyword:`is` and :keyword:`is not` operators cannot be customized; also they can be applied to any two objects and never raise an exception. .. index:: operator: in operator: not in Two more operations with the same syntactic priority, ``in`` and ``not in``, are supported only by sequence types (below). .. _typesnumeric: Numeric Types --- :class:`int`, :class:`float`, :class:`complex` ================================================================ .. index:: object: numeric object: Boolean object: integer object: floating point object: complex number pair: C; language There are three distinct numeric types: :dfn:`integers`, :dfn:`floating point numbers`, and :dfn:`complex numbers`. In addition, Booleans are a subtype of integers. Integers have unlimited precision. Floating point numbers are implemented using :ctype:`double` in C---all bets on their precision are off unless you happen to know the machine you are working with. Complex numbers have a real and imaginary part, which are each implemented using :ctype:`double` in C. To extract these parts from a complex number *z*, use ``z.real`` and ``z.imag``. (The standard library includes additional numeric types, :mod:`fractions` that hold rationals, and :mod:`decimal` that hold floating-point numbers with user-definable precision.) .. index:: pair: numeric; literals pair: integer; literals pair: floating point; literals pair: complex number; literals pair: hexadecimal; literals pair: octal; literals pair: binary; literals Numbers are created by numeric literals or as the result of built-in functions and operators. Unadorned integer literals (including hex, octal and binary numbers) yield integers. Numeric literals containing a decimal point or an exponent sign yield floating point numbers. Appending ``'j'`` or ``'J'`` to a numeric literal yields an imaginary number (a complex number with a zero real part) which you can add to an integer or float to get a complex number with real and imaginary parts. .. index:: single: arithmetic builtin: int builtin: float builtin: complex Python fully supports mixed arithmetic: when a binary arithmetic operator has operands of different numeric types, the operand with the "narrower" type is widened to that of the other, where integer is narrower than floating point, which is narrower than complex. Comparisons between numbers of mixed type use the same rule. [#]_ The constructors :func:`int`, :func:`float`, and :func:`complex` can be used to produce numbers of a specific type. All numeric types (except complex) support the following operations, sorted by ascending priority (operations in the same box have the same priority; all numeric operations have a higher priority than comparison operations): +---------------------+---------------------------------+-------+--------------------+ | Operation | Result | Notes | Full documentation | +=====================+=================================+=======+====================+ | ``x + y`` | sum of *x* and *y* | | | +---------------------+---------------------------------+-------+--------------------+ | ``x - y`` | difference of *x* and *y* | | | +---------------------+---------------------------------+-------+--------------------+ | ``x * y`` | product of *x* and *y* | | | +---------------------+---------------------------------+-------+--------------------+ | ``x / y`` | quotient of *x* and *y* | | | +---------------------+---------------------------------+-------+--------------------+ | ``x // y`` | floored quotient of *x* and | \(1) | | | | *y* | | | +---------------------+---------------------------------+-------+--------------------+ | ``x % y`` | remainder of ``x / y`` | \(2) | | +---------------------+---------------------------------+-------+--------------------+ | ``-x`` | *x* negated | | | +---------------------+---------------------------------+-------+--------------------+ | ``+x`` | *x* unchanged | | | +---------------------+---------------------------------+-------+--------------------+ | ``abs(x)`` | absolute value or magnitude of | | :func:`abs` | | | *x* | | | +---------------------+---------------------------------+-------+--------------------+ | ``int(x)`` | *x* converted to integer | \(3) | :func:`int` | +---------------------+---------------------------------+-------+--------------------+ | ``float(x)`` | *x* converted to floating point | \(4) | :func:`float` | +---------------------+---------------------------------+-------+--------------------+ | ``complex(re, im)`` | a complex number with real part | | :func:`complex` | | | *re*, imaginary part *im*. | | | | | *im* defaults to zero. | | | +---------------------+---------------------------------+-------+--------------------+ | ``c.conjugate()`` | conjugate of the complex number | | | | | *c* | | | +---------------------+---------------------------------+-------+--------------------+ | ``divmod(x, y)`` | the pair ``(x // y, x % y)`` | \(2) | :func:`divmod` | +---------------------+---------------------------------+-------+--------------------+ | ``pow(x, y)`` | *x* to the power *y* | \(5) | :func:`pow` | +---------------------+---------------------------------+-------+--------------------+ | ``x ** y`` | *x* to the power *y* | \(5) | | +---------------------+---------------------------------+-------+--------------------+ .. index:: triple: operations on; numeric; types single: conjugate() (complex number method) Notes: (1) Also referred to as integer division. The resultant value is a whole integer, though the result's type is not necessarily int. The result is always rounded towards minus infinity: ``1//2`` is ``0``, ``(-1)//2`` is ``-1``, ``1//(-2)`` is ``-1``, and ``(-1)//(-2)`` is ``0``. (2) Not for complex numbers. Instead convert to floats using :func:`abs` if appropriate. (3) .. index:: module: math single: floor() (in module math) single: ceil() (in module math) single: trunc() (in module math) pair: numeric; conversions pair: C; language Conversion from floating point to integer may round or truncate as in C; see functions :func:`floor` and :func:`ceil` in the :mod:`math` module for well-defined conversions. (4) float also accepts the strings "nan" and "inf" with an optional prefix "+" or "-" for Not a Number (NaN) and positive or negative infinity. (5) Python defines ``pow(0, 0)`` and ``0 ** 0`` to be ``1``, as is common for programming languages. All :class:`numbers.Real` types (:class:`int` and :class:`float`) also include the following operations: +--------------------+------------------------------------+--------+ | Operation | Result | Notes | +====================+====================================+========+ | ``math.trunc(x)`` | *x* truncated to Integral | | +--------------------+------------------------------------+--------+ | ``round(x[, n])`` | *x* rounded to n digits, | | | | rounding half to even. If n is | | | | omitted, it defaults to 0. | | +--------------------+------------------------------------+--------+ | ``math.floor(x)`` | the greatest integral float <= *x* | | +--------------------+------------------------------------+--------+ | ``math.ceil(x)`` | the least integral float >= *x* | | +--------------------+------------------------------------+--------+ For additional numeric operations see the :mod:`math` and :mod:`cmath` modules. .. XXXJH exceptions: overflow (when? what operations?) zerodivision .. _bitstring-ops: Bit-string Operations on Integer Types -------------------------------------- .. _bit-string-operations: Integers support additional operations that make sense only for bit-strings. Negative numbers are treated as their 2's complement value (this assumes a sufficiently large number of bits that no overflow occurs during the operation). The priorities of the binary bitwise operations are all lower than the numeric operations and higher than the comparisons; the unary operation ``~`` has the same priority as the other unary numeric operations (``+`` and ``-``). This table lists the bit-string operations sorted in ascending priority (operations in the same box have the same priority): +------------+--------------------------------+----------+ | Operation | Result | Notes | +============+================================+==========+ | ``x | y`` | bitwise :dfn:`or` of *x* and | | | | *y* | | +------------+--------------------------------+----------+ | ``x ^ y`` | bitwise :dfn:`exclusive or` of | | | | *x* and *y* | | +------------+--------------------------------+----------+ | ``x & y`` | bitwise :dfn:`and` of *x* and | | | | *y* | | +------------+--------------------------------+----------+ | ``x << n`` | *x* shifted left by *n* bits | (1)(2) | +------------+--------------------------------+----------+ | ``x >> n`` | *x* shifted right by *n* bits | (1)(3) | +------------+--------------------------------+----------+ | ``~x`` | the bits of *x* inverted | | +------------+--------------------------------+----------+ .. index:: triple: operations on; integer; types pair: bit-string; operations pair: shifting; operations pair: masking; operations Notes: (1) Negative shift counts are illegal and cause a :exc:`ValueError` to be raised. (2) A left shift by *n* bits is equivalent to multiplication by ``pow(2, n)`` without overflow check. (3) A right shift by *n* bits is equivalent to division by ``pow(2, n)`` without overflow check. Additional Methods on Integer Types ----------------------------------- .. method:: int.bit_length() Return the number of bits necessary to represent an integer in binary, excluding the sign and leading zeros:: >>> n = -37 >>> bin(n) '-0b100101' >>> n.bit_length() 6 More precisely, if ``x`` is nonzero, then ``x.bit_length()`` is the unique positive integer ``k`` such that ``2**(k-1) <= abs(x) < 2**k``. Equivalently, when ``abs(x)`` is small enough to have a correctly rounded logarithm, then ``k = 1 + int(log(abs(x), 2))``. If ``x`` is zero, then ``x.bit_length()`` returns ``0``. Equivalent to:: def bit_length(self): s = bin(x) # binary representation: bin(-37) --> '-0b100101' s = s.lstrip('-0b') # remove leading zeros and minus sign return len(s) # len('100101') --> 6 .. versionadded:: 3.1 Additional Methods on Float --------------------------- The float type has some additional methods. .. method:: float.as_integer_ratio() Return a pair of integers whose ratio is exactly equal to the original float and with a positive denominator. Raises :exc:`OverflowError` on infinities and a :exc:`ValueError` on NaNs. Two methods support conversion to and from hexadecimal strings. Since Python's floats are stored internally as binary numbers, converting a float to or from a *decimal* string usually involves a small rounding error. In contrast, hexadecimal strings allow exact representation and specification of floating-point numbers. This can be useful when debugging, and in numerical work. .. method:: float.hex() Return a representation of a floating-point number as a hexadecimal string. For finite floating-point numbers, this representation will always include a leading ``0x`` and a trailing ``p`` and exponent. .. method:: float.fromhex(s) Class method to return the float represented by a hexadecimal string *s*. The string *s* may have leading and trailing whitespace. Note that :meth:`float.hex` is an instance method, while :meth:`float.fromhex` is a class method. A hexadecimal string takes the form:: [sign] ['0x'] integer ['.' fraction] ['p' exponent] where the optional ``sign`` may by either ``+`` or ``-``, ``integer`` and ``fraction`` are strings of hexadecimal digits, and ``exponent`` is a decimal integer with an optional leading sign. Case is not significant, and there must be at least one hexadecimal digit in either the integer or the fraction. This syntax is similar to the syntax specified in section 6.4.4.2 of the C99 standard, and also to the syntax used in Java 1.5 onwards. In particular, the output of :meth:`float.hex` is usable as a hexadecimal floating-point literal in C or Java code, and hexadecimal strings produced by C's ``%a`` format character or Java's ``Double.toHexString`` are accepted by :meth:`float.fromhex`. Note that the exponent is written in decimal rather than hexadecimal, and that it gives the power of 2 by which to multiply the coefficient. For example, the hexadecimal string ``0x3.a7p10`` represents the floating-point number ``(3 + 10./16 + 7./16**2) * 2.0**10``, or ``3740.0``:: >>> float.fromhex('0x3.a7p10') 3740.0 Applying the reverse conversion to ``3740.0`` gives a different hexadecimal string representing the same number:: >>> float.hex(3740.0) '0x1.d380000000000p+11' .. _typeiter: Iterator Types ============== .. index:: single: iterator protocol single: protocol; iterator single: sequence; iteration single: container; iteration over Python supports a concept of iteration over containers. This is implemented using two distinct methods; these are used to allow user-defined classes to support iteration. Sequences, described below in more detail, always support the iteration methods. One method needs to be defined for container objects to provide iteration support: .. XXX duplicated in reference/datamodel! .. method:: container.__iter__() Return an iterator object. The object is required to support the iterator protocol described below. If a container supports different types of iteration, additional methods can be provided to specifically request iterators for those iteration types. (An example of an object supporting multiple forms of iteration would be a tree structure which supports both breadth-first and depth-first traversal.) This method corresponds to the :attr:`tp_iter` slot of the type structure for Python objects in the Python/C API. The iterator objects themselves are required to support the following two methods, which together form the :dfn:`iterator protocol`: .. method:: iterator.__iter__() Return the iterator object itself. This is required to allow both containers and iterators to be used with the :keyword:`for` and :keyword:`in` statements. This method corresponds to the :attr:`tp_iter` slot of the type structure for Python objects in the Python/C API. .. method:: iterator.__next__() Return the next item from the container. If there are no further items, raise the :exc:`StopIteration` exception. This method corresponds to the :attr:`tp_iternext` slot of the type structure for Python objects in the Python/C API. Python defines several iterator objects to support iteration over general and specific sequence types, dictionaries, and other more specialized forms. The specific types are not important beyond their implementation of the iterator protocol. Once an iterator's :meth:`__next__` method raises :exc:`StopIteration`, it must continue to do so on subsequent calls. Implementations that do not obey this property are deemed broken. Python's :term:`generator`\s provide a convenient way to implement the iterator protocol. If a container object's :meth:`__iter__` method is implemented as a generator, it will automatically return an iterator object (technically, a generator object) supplying the :meth:`__iter__` and :meth:`__next__` methods. .. _typesseq: Sequence Types --- :class:`str`, :class:`bytes`, :class:`bytearray`, :class:`list`, :class:`tuple`, :class:`range` ================================================================================================================== There are six sequence types: strings, byte sequences (:class:`bytes` objects), byte arrays (:class:`bytearray` objects), lists, tuples, and range objects. For other containers see the built in :class:`dict` and :class:`set` classes, and the :mod:`collections` module. .. index:: object: sequence object: string object: bytes object: bytearray object: tuple object: list object: range Strings contain Unicode characters. Their literals are written in single or double quotes: ``'xyzzy'``, ``"frobozz"``. See :ref:`strings` for more about string literals. In addition to the functionality described here, there are also string-specific methods described in the :ref:`string-methods` section. Bytes and bytearray objects contain single bytes -- the former is immutable while the latter is a mutable sequence. Bytes objects can be constructed the constructor, :func:`bytes`, and from literals; use a ``b`` prefix with normal string syntax: ``b'xyzzy'``. To construct byte arrays, use the :func:`bytearray` function. .. warning:: While string objects are sequences of characters (represented by strings of length 1), bytes and bytearray objects are sequences of *integers* (between 0 and 255), representing the ASCII value of single bytes. That means that for a bytes or bytearray object *b*, ``b[0]`` will be an integer, while ``b[0:1]`` will be a bytes or bytearray object of length 1. The representation of bytes objects uses the literal format (``b'...'``) since it is generally more useful than e.g. ``bytes([50, 19, 100])``. You can always convert a bytes object into a list of integers using ``list(b)``. Also, while in previous Python versions, byte strings and Unicode strings could be exchanged for each other rather freely (barring encoding issues), strings and bytes are now completely separate concepts. There's no implicit en-/decoding if you pass and object of the wrong type. A string always compares unequal to a bytes or bytearray object. Lists are constructed with square brackets, separating items with commas: ``[a, b, c]``. Tuples are constructed by the comma operator (not within square brackets), with or without enclosing parentheses, but an empty tuple must have the enclosing parentheses, such as ``a, b, c`` or ``()``. A single item tuple must have a trailing comma, such as ``(d,)``. Objects of type range are created using the :func:`range` function. They don't support slicing, concatenation or repetition, and using ``in``, ``not in``, :func:`min` or :func:`max` on them is inefficient. Most sequence types support the following operations. The ``in`` and ``not in`` operations have the same priorities as the comparison operations. The ``+`` and ``*`` operations have the same priority as the corresponding numeric operations. [#]_ Additional methods are provided for :ref:`typesseq-mutable`. This table lists the sequence operations sorted in ascending priority (operations in the same box have the same priority). In the table, *s* and *t* are sequences of the same type; *n*, *i* and *j* are integers: +------------------+--------------------------------+----------+ | Operation | Result | Notes | +==================+================================+==========+ | ``x in s`` | ``True`` if an item of *s* is | \(1) | | | equal to *x*, else ``False`` | | +------------------+--------------------------------+----------+ | ``x not in s`` | ``False`` if an item of *s* is | \(1) | | | equal to *x*, else ``True`` | | +------------------+--------------------------------+----------+ | ``s + t`` | the concatenation of *s* and | \(6) | | | *t* | | +------------------+--------------------------------+----------+ | ``s * n, n * s`` | *n* shallow copies of *s* | \(2) | | | concatenated | | +------------------+--------------------------------+----------+ | ``s[i]`` | *i*'th item of *s*, origin 0 | \(3) | +------------------+--------------------------------+----------+ | ``s[i:j]`` | slice of *s* from *i* to *j* | (3)(4) | +------------------+--------------------------------+----------+ | ``s[i:j:k]`` | slice of *s* from *i* to *j* | (3)(5) | | | with step *k* | | +------------------+--------------------------------+----------+ | ``len(s)`` | length of *s* | | +------------------+--------------------------------+----------+ | ``min(s)`` | smallest item of *s* | | +------------------+--------------------------------+----------+ | ``max(s)`` | largest item of *s* | | +------------------+--------------------------------+----------+ Sequence types also support comparisons. In particular, tuples and lists are compared lexicographically by comparing corresponding elements. This means that to compare equal, every element must compare equal and the two sequences must be of the same type and have the same length. (For full details see :ref:`comparisons` in the language reference.) .. index:: triple: operations on; sequence; types builtin: len builtin: min builtin: max pair: concatenation; operation pair: repetition; operation pair: subscript; operation pair: slice; operation operator: in operator: not in Notes: (1) When *s* is a string object, the ``in`` and ``not in`` operations act like a substring test. (2) Values of *n* less than ``0`` are treated as ``0`` (which yields an empty sequence of the same type as *s*). Note also that the copies are shallow; nested structures are not copied. This often haunts new Python programmers; consider: >>> lists = [[]] * 3 >>> lists [[], [], []] >>> lists[0].append(3) >>> lists [[3], [3], [3]] What has happened is that ``[[]]`` is a one-element list containing an empty list, so all three elements of ``[[]] * 3`` are (pointers to) this single empty list. Modifying any of the elements of ``lists`` modifies this single list. You can create a list of different lists this way: >>> lists = [[] for i in range(3)] >>> lists[0].append(3) >>> lists[1].append(5) >>> lists[2].append(7) >>> lists [[3], [5], [7]] (3) If *i* or *j* is negative, the index is relative to the end of the string: ``len(s) + i`` or ``len(s) + j`` is substituted. But note that ``-0`` is still ``0``. (4) The slice of *s* from *i* to *j* is defined as the sequence of items with index *k* such that ``i <= k < j``. If *i* or *j* is greater than ``len(s)``, use ``len(s)``. If *i* is omitted or ``None``, use ``0``. If *j* is omitted or ``None``, use ``len(s)``. If *i* is greater than or equal to *j*, the slice is empty. (5) The slice of *s* from *i* to *j* with step *k* is defined as the sequence of items with index ``x = i + n*k`` such that ``0 <= n < (j-i)/k``. In other words, the indices are ``i``, ``i+k``, ``i+2*k``, ``i+3*k`` and so on, stopping when *j* is reached (but never including *j*). If *i* or *j* is greater than ``len(s)``, use ``len(s)``. If *i* or *j* are omitted or ``None``, they become "end" values (which end depends on the sign of *k*). Note, *k* cannot be zero. If *k* is ``None``, it is treated like ``1``. (6) If *s* and *t* are both strings, some Python implementations such as CPython can usually perform an in-place optimization for assignments of the form ``s=s+t`` or ``s+=t``. When applicable, this optimization makes quadratic run-time much less likely. This optimization is both version and implementation dependent. For performance sensitive code, it is preferable to use the :meth:`str.join` method which assures consistent linear concatenation performance across versions and implementations. .. _string-methods: String Methods -------------- .. index:: pair: string; methods String objects support the methods listed below. Note that none of these methods take keyword arguments. In addition, Python's strings support the sequence type methods described in the :ref:`typesseq` section. To output formatted strings, see the :ref:`string-formatting` section. Also, see the :mod:`re` module for string functions based on regular expressions. .. method:: str.capitalize() Return a copy of the string with only its first character capitalized. .. method:: str.center(width[, fillchar]) Return centered in a string of length *width*. Padding is done using the specified *fillchar* (default is a space). .. method:: str.count(sub[, start[, end]]) Return the number of occurrences of substring *sub* in the range [*start*, *end*]. Optional arguments *start* and *end* are interpreted as in slice notation. .. method:: str.encode([encoding[, errors]]) Return an encoded version of the string. Default encoding is the current default string encoding. *errors* may be given to set a different error handling scheme. The default for *errors* is ``'strict'``, meaning that encoding errors raise a :exc:`UnicodeError`. Other possible values are ``'ignore'``, ``'replace'``, ``'xmlcharrefreplace'``, ``'backslashreplace'`` and any other name registered via :func:`codecs.register_error`, see section :ref:`codec-base-classes`. For a list of possible encodings, see section :ref:`standard-encodings`. .. method:: str.endswith(suffix[, start[, end]]) Return ``True`` if the string ends with the specified *suffix*, otherwise return ``False``. *suffix* can also be a tuple of suffixes to look for. With optional *start*, test beginning at that position. With optional *end*, stop comparing at that position. .. method:: str.expandtabs([tabsize]) Return a copy of the string where all tab characters are replaced by one or more spaces, depending on the current column and the given tab size. The column number is reset to zero after each newline occurring in the string. If *tabsize* is not given, a tab size of ``8`` characters is assumed. This doesn't understand other non-printing characters or escape sequences. .. method:: str.find(sub[, start[, end]]) Return the lowest index in the string where substring *sub* is found, such that *sub* is contained in the range [*start*, *end*]. Optional arguments *start* and *end* are interpreted as in slice notation. Return ``-1`` if *sub* is not found. .. method:: str.format(format_string, *args, **kwargs) Perform a string formatting operation. The *format_string* argument can contain literal text or replacement fields delimited by braces ``{}``. Each replacement field contains either the numeric index of a positional argument, or the name of a keyword argument. Returns a copy of *format_string* where each replacement field is replaced with the string value of the corresponding argument. >>> "The sum of 1 + 2 is {0}".format(1+2) 'The sum of 1 + 2 is 3' See :ref:`formatstrings` for a description of the various formatting options that can be specified in format strings. .. method:: str.index(sub[, start[, end]]) Like :meth:`find`, but raise :exc:`ValueError` when the substring is not found. .. method:: str.isalnum() Return true if all characters in the string are alphanumeric and there is at least one character, false otherwise. .. method:: str.isalpha() Return true if all characters in the string are alphabetic and there is at least one character, false otherwise. .. method:: str.isdecimal() Return true if all characters in the string are decimal characters and there is at least one character, false otherwise. Decimal characters include digit characters, and all characters that that can be used to form decimal-radix numbers, e.g. U+0660, ARABIC-INDIC DIGIT ZERO. .. method:: str.isdigit() Return true if all characters in the string are digits and there is at least one character, false otherwise. .. method:: str.isidentifier() Return true if the string is a valid identifier according to the language definition, section :ref:`identifiers`. .. method:: str.islower() Return true if all cased characters in the string are lowercase and there is at least one cased character, false otherwise. .. method:: str.isnumeric() Return true if all characters in the string are numeric characters, and there is at least one character, false otherwise. Numeric characters include digit characters, and all characters that have the Unicode numeric value property, e.g. U+2155, VULGAR FRACTION ONE FIFTH. .. method:: str.isprintable() Return true if all characters in the string are printable or the string is empty, false otherwise. Nonprintable characters are those characters defined in the Unicode character database as "Other" or "Separator", excepting the ASCII space (0x20) which is considered printable. (Note that printable characters in this context are those which should not be escaped when :func:`repr` is invoked on a string. It has no bearing on the handling of strings written to :data:`sys.stdout` or :data:`sys.stderr`.) .. method:: str.isspace() Return true if there are only whitespace characters in the string and there is at least one character, false otherwise. .. method:: str.istitle() Return true if the string is a titlecased string and there is at least one character, for example uppercase characters may only follow uncased characters and lowercase characters only cased ones. Return false otherwise. .. method:: str.isupper() Return true if all cased characters in the string are uppercase and there is at least one cased character, false otherwise. .. method:: str.join(seq) Return a string which is the concatenation of the strings in the sequence *seq*. A :exc:`TypeError` will be raised if there are any non-string values in *seq*, including :class:`bytes` objects. The separator between elements is the string providing this method. .. method:: str.ljust(width[, fillchar]) Return the string left justified in a string of length *width*. Padding is done using the specified *fillchar* (default is a space). The original string is returned if *width* is less than ``len(s)``. .. method:: str.lower() Return a copy of the string converted to lowercase. .. method:: str.lstrip([chars]) Return a copy of the string with leading characters removed. The *chars* argument is a string specifying the set of characters to be removed. If omitted or ``None``, the *chars* argument defaults to removing whitespace. The *chars* argument is not a prefix; rather, all combinations of its values are stripped: >>> ' spacious '.lstrip() 'spacious ' >>> 'www.example.com'.lstrip('cmowz.') 'example.com' .. method:: str.maketrans(x[, y[, z]]) This static method returns a translation table usable for :meth:`str.translate`. If there is only one argument, it must be a dictionary mapping Unicode ordinals (integers) or characters (strings of length 1) to Unicode ordinals, strings (of arbitrary lengths) or None. Character keys will then be converted to ordinals. If there are two arguments, they must be strings of equal length, and in the resulting dictionary, each character in x will be mapped to the character at the same position in y. If there is a third argument, it must be a string, whose characters will be mapped to None in the result. .. method:: str.partition(sep) Split the string at the first occurrence of *sep*, and return a 3-tuple containing the part before the separator, the separator itself, and the part after the separator. If the separator is not found, return a 3-tuple containing the string itself, followed by two empty strings. .. method:: str.replace(old, new[, count]) Return a copy of the string with all occurrences of substring *old* replaced by *new*. If the optional argument *count* is given, only the first *count* occurrences are replaced. .. method:: str.rfind(sub[, start[, end]]) Return the highest index in the string where substring *sub* is found, such that *sub* is contained within s[start,end]. Optional arguments *start* and *end* are interpreted as in slice notation. Return ``-1`` on failure. .. method:: str.rindex(sub[, start[, end]]) Like :meth:`rfind` but raises :exc:`ValueError` when the substring *sub* is not found. .. method:: str.rjust(width[, fillchar]) Return the string right justified in a string of length *width*. Padding is done using the specified *fillchar* (default is a space). The original string is returned if *width* is less than ``len(s)``. .. method:: str.rpartition(sep) Split the string at the last occurrence of *sep*, and return a 3-tuple containing the part before the separator, the separator itself, and the part after the separator. If the separator is not found, return a 3-tuple containing two empty strings, followed by the string itself. .. method:: str.rsplit([sep[, maxsplit]]) Return a list of the words in the string, using *sep* as the delimiter string. If *maxsplit* is given, at most *maxsplit* splits are done, the *rightmost* ones. If *sep* is not specified or ``None``, any whitespace string is a separator. Except for splitting from the right, :meth:`rsplit` behaves like :meth:`split` which is described in detail below. .. method:: str.rstrip([chars]) Return a copy of the string with trailing characters removed. The *chars* argument is a string specifying the set of characters to be removed. If omitted or ``None``, the *chars* argument defaults to removing whitespace. The *chars* argument is not a suffix; rather, all combinations of its values are stripped: >>> ' spacious '.rstrip() ' spacious' >>> 'mississippi'.rstrip('ipz') 'mississ' .. method:: str.split([sep[, maxsplit]]) Return a list of the words in the string, using *sep* as the delimiter string. If *maxsplit* is given, at most *maxsplit* splits are done (thus, the list will have at most ``maxsplit+1`` elements). If *maxsplit* is not specified, then there is no limit on the number of splits (all possible splits are made). If *sep* is given, consecutive delimiters are not grouped together and are deemed to delimit empty strings (for example, ``'1,,2'.split(',')`` returns ``['1', '', '2']``). The *sep* argument may consist of multiple characters (for example, ``'1<>2<>3'.split('<>')`` returns ``['1', '2', '3']``). Splitting an empty string with a specified separator returns ``['']``. If *sep* is not specified or is ``None``, a different splitting algorithm is applied: runs of consecutive whitespace are regarded as a single separator, and the result will contain no empty strings at the start or end if the string has leading or trailing whitespace. Consequently, splitting an empty string or a string consisting of just whitespace with a ``None`` separator returns ``[]``. For example, ``' 1 2 3 '.split()`` returns ``['1', '2', '3']``, and ``' 1 2 3 '.split(None, 1)`` returns ``['1', '2 3 ']``. .. method:: str.splitlines([keepends]) Return a list of the lines in the string, breaking at line boundaries. Line breaks are not included in the resulting list unless *keepends* is given and true. .. method:: str.startswith(prefix[, start[, end]]) Return ``True`` if string starts with the *prefix*, otherwise return ``False``. *prefix* can also be a tuple of prefixes to look for. With optional *start*, test string beginning at that position. With optional *end*, stop comparing string at that position. .. method:: str.strip([chars]) Return a copy of the string with the leading and trailing characters removed. The *chars* argument is a string specifying the set of characters to be removed. If omitted or ``None``, the *chars* argument defaults to removing whitespace. The *chars* argument is not a prefix or suffix; rather, all combinations of its values are stripped: >>> ' spacious '.strip() 'spacious' >>> 'www.example.com'.strip('cmowz.') 'example' .. method:: str.swapcase() Return a copy of the string with uppercase characters converted to lowercase and vice versa. .. method:: str.title() Return a titlecased version of the string: words start with uppercase characters, all remaining cased characters are lowercase. .. method:: str.translate(map) Return a copy of the *s* where all characters have been mapped through the *map* which must be a dictionary of Unicode ordinals (integers) to Unicode ordinals, strings or ``None``. Unmapped characters are left untouched. Characters mapped to ``None`` are deleted. You can use :meth:`str.maketrans` to create a translation map from character-to-character mappings in different formats. .. note:: An even more flexible approach is to create a custom character mapping codec using the :mod:`codecs` module (see :mod:`encodings.cp1251` for an example). .. method:: str.upper() Return a copy of the string converted to uppercase. .. method:: str.zfill(width) Return the numeric string left filled with zeros in a string of length *width*. A sign prefix is handled correctly. The original string is returned if *width* is less than ``len(s)``. .. _old-string-formatting: Old String Formatting Operations -------------------------------- .. index:: single: formatting, string (%) single: interpolation, string (%) single: string; formatting single: string; interpolation single: printf-style formatting single: sprintf-style formatting single: % formatting single: % interpolation .. XXX is the note enough? .. note:: The formatting operations described here are obsolete and may go away in future versions of Python. Use the new :ref:`string-formatting` in new code. String objects have one unique built-in operation: the ``%`` operator (modulo). This is also known as the string *formatting* or *interpolation* operator. Given ``format % values`` (where *format* is a string), ``%`` conversion specifications in *format* are replaced with zero or more elements of *values*. The effect is similar to the using :cfunc:`sprintf` in the C language. If *format* requires a single argument, *values* may be a single non-tuple object. [#]_ Otherwise, *values* must be a tuple with exactly the number of items specified by the format string, or a single mapping object (for example, a dictionary). A conversion specifier contains two or more characters and has the following components, which must occur in this order: #. The ``'%'`` character, which marks the start of the specifier. #. Mapping key (optional), consisting of a parenthesised sequence of characters (for example, ``(somename)``). #. Conversion flags (optional), which affect the result of some conversion types. #. Minimum field width (optional). If specified as an ``'*'`` (asterisk), the actual width is read from the next element of the tuple in *values*, and the object to convert comes after the minimum field width and optional precision. #. Precision (optional), given as a ``'.'`` (dot) followed by the precision. If specified as ``'*'`` (an asterisk), the actual width is read from the next element of the tuple in *values*, and the value to convert comes after the precision. #. Length modifier (optional). #. Conversion type. When the right argument is a dictionary (or other mapping type), then the formats in the string *must* include a parenthesised mapping key into that dictionary inserted immediately after the ``'%'`` character. The mapping key selects the value to be formatted from the mapping. For example: >>> print('%(language)s has %(#)03d quote types.' % \ ... {'language': "Python", "#": 2}) Python has 002 quote types. In this case no ``*`` specifiers may occur in a format (since they require a sequential parameter list). The conversion flag characters are: +---------+---------------------------------------------------------------------+ | Flag | Meaning | +=========+=====================================================================+ | ``'#'`` | The value conversion will use the "alternate form" (where defined | | | below). | +---------+---------------------------------------------------------------------+ | ``'0'`` | The conversion will be zero padded for numeric values. | +---------+---------------------------------------------------------------------+ | ``'-'`` | The converted value is left adjusted (overrides the ``'0'`` | | | conversion if both are given). | +---------+---------------------------------------------------------------------+ | ``' '`` | (a space) A blank should be left before a positive number (or empty | | | string) produced by a signed conversion. | +---------+---------------------------------------------------------------------+ | ``'+'`` | A sign character (``'+'`` or ``'-'``) will precede the conversion | | | (overrides a "space" flag). | +---------+---------------------------------------------------------------------+ A length modifier (``h``, ``l``, or ``L``) may be present, but is ignored as it is not necessary for Python -- so e.g. ``%ld`` is identical to ``%d``. The conversion types are: +------------+-----------------------------------------------------+-------+ | Conversion | Meaning | Notes | +============+=====================================================+=======+ | ``'d'`` | Signed integer decimal. | | +------------+-----------------------------------------------------+-------+ | ``'i'`` | Signed integer decimal. | | +------------+-----------------------------------------------------+-------+ | ``'o'`` | Signed octal value. | \(1) | +------------+-----------------------------------------------------+-------+ | ``'u'`` | Obselete type -- it is identical to ``'d'``. | \(7) | +------------+-----------------------------------------------------+-------+ | ``'x'`` | Signed hexadecimal (lowercase). | \(2) | +------------+-----------------------------------------------------+-------+ | ``'X'`` | Signed hexadecimal (uppercase). | \(2) | +------------+-----------------------------------------------------+-------+ | ``'e'`` | Floating point exponential format (lowercase). | \(3) | +------------+-----------------------------------------------------+-------+ | ``'E'`` | Floating point exponential format (uppercase). | \(3) | +------------+-----------------------------------------------------+-------+ | ``'f'`` | Floating point decimal format. | \(3) | +------------+-----------------------------------------------------+-------+ | ``'F'`` | Floating point decimal format. | \(3) | +------------+-----------------------------------------------------+-------+ | ``'g'`` | Floating point format. Uses lowercase exponential | \(4) | | | format if exponent is less than -4 or not less than | | | | precision, decimal format otherwise. | | +------------+-----------------------------------------------------+-------+ | ``'G'`` | Floating point format. Uses uppercase exponential | \(4) | | | format if exponent is less than -4 or not less than | | | | precision, decimal format otherwise. | | +------------+-----------------------------------------------------+-------+ | ``'c'`` | Single character (accepts integer or single | | | | character string). | | +------------+-----------------------------------------------------+-------+ | ``'r'`` | String (converts any python object using | \(5) | | | :func:`repr`). | | +------------+-----------------------------------------------------+-------+ | ``'s'`` | String (converts any python object using | | | | :func:`str`). | | +------------+-----------------------------------------------------+-------+ | ``'%'`` | No argument is converted, results in a ``'%'`` | | | | character in the result. | | +------------+-----------------------------------------------------+-------+ Notes: (1) The alternate form causes a leading zero (``'0'``) to be inserted between left-hand padding and the formatting of the number if the leading character of the result is not already a zero. (2) The alternate form causes a leading ``'0x'`` or ``'0X'`` (depending on whether the ``'x'`` or ``'X'`` format was used) to be inserted between left-hand padding and the formatting of the number if the leading character of the result is not already a zero. (3) The alternate form causes the result to always contain a decimal point, even if no digits follow it. The precision determines the number of digits after the decimal point and defaults to 6. (4) The alternate form causes the result to always contain a decimal point, and trailing zeroes are not removed as they would otherwise be. The precision determines the number of significant digits before and after the decimal point and defaults to 6. (5) The precision determines the maximal number of characters used. (7) See :pep:`237`. Since Python strings have an explicit length, ``%s`` conversions do not assume that ``'\0'`` is the end of the string. .. XXX Examples? For safety reasons, floating point precisions are clipped to 50; ``%f`` conversions for numbers whose absolute value is over 1e25 are replaced by ``%g`` conversions. [#]_ All other errors raise exceptions. .. index:: module: string module: re Additional string operations are defined in standard modules :mod:`string` and :mod:`re`. .. _typesseq-range: Range Type ---------- .. index:: object: range The :class:`range` type is an immutable sequence which is commonly used for looping. The advantage of the :class:`range` type is that an :class:`range` object will always take the same amount of memory, no matter the size of the range it represents. There are no consistent performance advantages. Range objects have very little behavior: they only support indexing, iteration, and the :func:`len` function. .. _typesseq-mutable: Mutable Sequence Types ---------------------- .. index:: triple: mutable; sequence; types object: list object: bytearray List and bytearray objects support additional operations that allow in-place modification of the object. Other mutable sequence types (when added to the language) should also support these operations. Strings and tuples are immutable sequence types: such objects cannot be modified once created. The following operations are defined on mutable sequence types (where *x* is an arbitrary object). Note that while lists allow their items to be of any type, bytearray object "items" are all integers in the range 0 <= x < 256. +------------------------------+--------------------------------+---------------------+ | Operation | Result | Notes | +==============================+================================+=====================+ | ``s[i] = x`` | item *i* of *s* is replaced by | | | | *x* | | +------------------------------+--------------------------------+---------------------+ | ``s[i:j] = t`` | slice of *s* from *i* to *j* | | | | is replaced by the contents of | | | | the iterable *t* | | +------------------------------+--------------------------------+---------------------+ | ``del s[i:j]`` | same as ``s[i:j] = []`` | | +------------------------------+--------------------------------+---------------------+ | ``s[i:j:k] = t`` | the elements of ``s[i:j:k]`` | \(1) | | | are replaced by those of *t* | | +------------------------------+--------------------------------+---------------------+ | ``del s[i:j:k]`` | removes the elements of | | | | ``s[i:j:k]`` from the list | | +------------------------------+--------------------------------+---------------------+ | ``s.append(x)`` | same as ``s[len(s):len(s)] = | | | | [x]`` | | +------------------------------+--------------------------------+---------------------+ | ``s.extend(x)`` | same as ``s[len(s):len(s)] = | \(2) | | | x`` | | +------------------------------+--------------------------------+---------------------+ | ``s.count(x)`` | return number of *i*'s for | | | | which ``s[i] == x`` | | +------------------------------+--------------------------------+---------------------+ | ``s.index(x[, i[, j]])`` | return smallest *k* such that | \(3) | | | ``s[k] == x`` and ``i <= k < | | | | j`` | | +------------------------------+--------------------------------+---------------------+ | ``s.insert(i, x)`` | same as ``s[i:i] = [x]`` | \(4) | +------------------------------+--------------------------------+---------------------+ | ``s.pop([i])`` | same as ``x = s[i]; del s[i]; | \(5) | | | return x`` | | +------------------------------+--------------------------------+---------------------+ | ``s.remove(x)`` | same as ``del s[s.index(x)]`` | \(3) | +------------------------------+--------------------------------+---------------------+ | ``s.reverse()`` | reverses the items of *s* in | \(6) | | | place | | +------------------------------+--------------------------------+---------------------+ | ``s.sort([key[, reverse]])`` | sort the items of *s* in place | (6), (7), (8) | +------------------------------+--------------------------------+---------------------+ .. index:: triple: operations on; sequence; types triple: operations on; list; type pair: subscript; assignment pair: slice; assignment statement: del single: append() (sequence method) single: extend() (sequence method) single: count() (sequence method) single: index() (sequence method) single: insert() (sequence method) single: pop() (sequence method) single: remove() (sequence method) single: reverse() (sequence method) single: sort() (sequence method) Notes: (1) *t* must have the same length as the slice it is replacing. (2) *x* can be any iterable object. (3) Raises :exc:`ValueError` when *x* is not found in *s*. When a negative index is passed as the second or third parameter to the :meth:`index` method, the sequence length is added, as for slice indices. If it is still negative, it is truncated to zero, as for slice indices. (4) When a negative index is passed as the first parameter to the :meth:`insert` method, the sequence length is added, as for slice indices. If it is still negative, it is truncated to zero, as for slice indices. (5) The optional argument *i* defaults to ``-1``, so that by default the last item is removed and returned. (6) The :meth:`sort` and :meth:`reverse` methods modify the sequence in place for economy of space when sorting or reversing a large sequence. To remind you that they operate by side effect, they don't return the sorted or reversed sequence. (7) The :meth:`sort` method takes optional arguments for controlling the comparisons. Each must be specified as a keyword argument. *key* specifies a function of one argument that is used to extract a comparison key from each list element: ``key=str.lower``. The default value is ``None``. *reverse* is a boolean value. If set to ``True``, then the list elements are sorted as if each comparison were reversed. The :meth:`sort` method is guaranteed to be stable. A sort is stable if it guarantees not to change the relative order of elements that compare equal --- this is helpful for sorting in multiple passes (for example, sort by department, then by salary grade). While a list is being sorted, the effect of attempting to mutate, or even inspect, the list is undefined. The C implementation makes the list appear empty for the duration, and raises :exc:`ValueError` if it can detect that the list has been mutated during a sort. (8) :meth:`sort` is not supported by :class:`bytearray` objects. .. _bytes-methods: Bytes and Byte Array Methods ---------------------------- .. index:: pair: bytes; methods pair: bytearray; methods Bytes and bytearray objects, being "strings of bytes", have all methods found on strings, with the exception of :func:`encode`, :func:`format` and :func:`isidentifier`, which do not make sense with these types. For converting the objects to strings, they have a :func:`decode` method. Wherever one of these methods needs to interpret the bytes as characters (e.g. the :func:`is...` methods), the ASCII character set is assumed. .. note:: The methods on bytes and bytearray objects don't accept strings as their arguments, just as the methods on strings don't accept bytes as their arguments. For example, you have to write :: a = "abc" b = a.replace("a", "f") and :: a = b"abc" b = a.replace(b"a", b"f") The bytes and bytearray types have an additional class method: .. method:: bytes.fromhex(string) bytearray.fromhex(string) This :class:`bytes` class method returns a bytes or bytearray object, decoding the given string object. The string must contain two hexadecimal digits per byte, spaces are ignored. >>> bytes.fromhex('f0 f1f2 ') b'\xf0\xf1\xf2' The translate method differs in semantics from the version available on strings: .. method:: bytes.translate(table[, delete]) Return a copy of the bytes or bytearray object where all bytes occurring in the optional argument *delete* are removed, and the remaining bytes have been mapped through the given translation table, which must be a bytes object of length 256. You can use the :func:`string.maketrans` helper function to create a translation table. Set the *table* argument to ``None`` for translations that only delete characters:: >>> b'read this short text'.translate(None, b'aeiou') b'rd ths shrt txt' .. _types-set: Set Types --- :class:`set`, :class:`frozenset` ============================================== .. index:: object: set A :dfn:`set` object is an unordered collection of distinct :term:`hashable` objects. Common uses include membership testing, removing duplicates from a sequence, and computing mathematical operations such as intersection, union, difference, and symmetric difference. (For other containers see the built in :class:`dict`, :class:`list`, and :class:`tuple` classes, and the :mod:`collections` module.) Like other collections, sets support ``x in set``, ``len(set)``, and ``for x in set``. Being an unordered collection, sets do not record element position or order of insertion. Accordingly, sets do not support indexing, slicing, or other sequence-like behavior. There are currently two builtin set types, :class:`set` and :class:`frozenset`. The :class:`set` type is mutable --- the contents can be changed using methods like :meth:`add` and :meth:`remove`. Since it is mutable, it has no hash value and cannot be used as either a dictionary key or as an element of another set. The :class:`frozenset` type is immutable and :term:`hashable` --- its contents cannot be altered after it is created; it can therefore be used as a dictionary key or as an element of another set. The constructors for both classes work the same: .. class:: set([iterable]) frozenset([iterable]) Return a new set or frozenset object whose elements are taken from *iterable*. The elements of a set must be hashable. To represent sets of sets, the inner sets must be :class:`frozenset` objects. If *iterable* is not specified, a new empty set is returned. Instances of :class:`set` and :class:`frozenset` provide the following operations: .. describe:: len(s) Return the cardinality of set *s*. .. describe:: x in s Test *x* for membership in *s*. .. describe:: x not in s Test *x* for non-membership in *s*. .. method:: isdisjoint(other) Return True if the set has no elements in common with *other*. Sets are disjoint if and only if their intersection is the empty set. .. method:: issubset(other) set <= other Test whether every element in the set is in *other*. .. method:: set < other Test whether the set is a true subset of *other*, that is, ``set <= other and set != other``. .. method:: issuperset(other) set >= other Test whether every element in *other* is in the set. .. method:: set > other Test whether the set is a true superset of *other*, that is, ``set >= other and set != other``. .. method:: union(other, ...) set | other | ... Return a new set with elements from the set and all others. .. method:: intersection(other, ...) set & other & ... Return a new set with elements common to the set and all others. .. method:: difference(other, ...) set - other - ... Return a new set with elements in the set that are not in the others. .. method:: symmetric_difference(other) set ^ other Return a new set with elements in either the set or *other* but not both. .. method:: copy() Return a new set with a shallow copy of *s*. Note, the non-operator versions of :meth:`union`, :meth:`intersection`, :meth:`difference`, and :meth:`symmetric_difference`, :meth:`issubset`, and :meth:`issuperset` methods will accept any iterable as an argument. In contrast, their operator based counterparts require their arguments to be sets. This precludes error-prone constructions like ``set('abc') & 'cbs'`` in favor of the more readable ``set('abc').intersection('cbs')``. Both :class:`set` and :class:`frozenset` support set to set comparisons. Two sets are equal if and only if every element of each set is contained in the other (each is a subset of the other). A set is less than another set if and only if the first set is a proper subset of the second set (is a subset, but is not equal). A set is greater than another set if and only if the first set is a proper superset of the second set (is a superset, but is not equal). Instances of :class:`set` are compared to instances of :class:`frozenset` based on their members. For example, ``set('abc') == frozenset('abc')`` returns ``True`` and so does ``set('abc') in set([frozenset('abc')])``. The subset and equality comparisons do not generalize to a complete ordering function. For example, any two disjoint sets are not equal and are not subsets of each other, so *all* of the following return ``False``: ``ab``. Since sets only define partial ordering (subset relationships), the output of the :meth:`list.sort` method is undefined for lists of sets. Set elements, like dictionary keys, must be :term:`hashable`. Binary operations that mix :class:`set` instances with :class:`frozenset` return the type of the first operand. For example: ``frozenset('ab') | set('bc')`` returns an instance of :class:`frozenset`. The following table lists operations available for :class:`set` that do not apply to immutable instances of :class:`frozenset`: .. method:: update(other, ...) set |= other | ... Update the set, adding elements from *other*. .. method:: intersection_update(other, ...) set &= other & ... Update the set, keeping only elements found in it and *other*. .. method:: difference_update(other, ...) set -= other | ... Update the set, removing elements found in others. .. method:: symmetric_difference_update(other) set ^= other Update the set, keeping only elements found in either set, but not in both. .. method:: add(elem) Add element *elem* to the set. .. method:: remove(elem) Remove element *elem* from the set. Raises :exc:`KeyError` if *elem* is not contained in the set. .. method:: discard(elem) Remove element *elem* from the set if it is present. .. method:: pop() Remove and return an arbitrary element from the set. Raises :exc:`KeyError` if the set is empty. .. method:: clear() Remove all elements from the set. Note, the non-operator versions of the :meth:`update`, :meth:`intersection_update`, :meth:`difference_update`, and :meth:`symmetric_difference_update` methods will accept any iterable as an argument. Note, the *elem* argument to the :meth:`__contains__`, :meth:`remove`, and :meth:`discard` methods may be a set. To support searching for an equivalent frozenset, the *elem* set is temporarily mutated during the search and then restored. During the search, the *elem* set should not be read or mutated since it does not have a meaningful value. .. _typesmapping: Mapping Types --- :class:`dict` =============================== .. index:: object: mapping object: dictionary triple: operations on; mapping; types triple: operations on; dictionary; type statement: del builtin: len A :dfn:`mapping` object maps :term:`hashable` values to arbitrary objects. Mappings are mutable objects. There is currently only one standard mapping type, the :dfn:`dictionary`. (For other containers see the built in :class:`list`, :class:`set`, and :class:`tuple` classes, and the :mod:`collections` module.) A dictionary's keys are *almost* arbitrary values. Values that are not :term:`hashable`, that is, values containing lists, dictionaries or other mutable types (that are compared by value rather than by object identity) may not be used as keys. Numeric types used for keys obey the normal rules for numeric comparison: if two numbers compare equal (such as ``1`` and ``1.0``) then they can be used interchangeably to index the same dictionary entry. (Note however, that since computers store floating-point numbers as approximations it is usually unwise to use them as dictionary keys.) Dictionaries can be created by placing a comma-separated list of ``key: value`` pairs within braces, for example: ``{'jack': 4098, 'sjoerd': 4127}`` or ``{4098: 'jack', 4127: 'sjoerd'}``, or by the :class:`dict` constructor. .. class:: dict([arg]) Return a new dictionary initialized from an optional positional argument or from a set of keyword arguments. If no arguments are given, return a new empty dictionary. If the positional argument *arg* is a mapping object, return a dictionary mapping the same keys to the same values as does the mapping object. Otherwise the positional argument must be a sequence, a container that supports iteration, or an iterator object. The elements of the argument must each also be of one of those kinds, and each must in turn contain exactly two objects. The first is used as a key in the new dictionary, and the second as the key's value. If a given key is seen more than once, the last value associated with it is retained in the new dictionary. If keyword arguments are given, the keywords themselves with their associated values are added as items to the dictionary. If a key is specified both in the positional argument and as a keyword argument, the value associated with the keyword is retained in the dictionary. For example, these all return a dictionary equal to ``{"one": 2, "two": 3}``: * ``dict(one=2, two=3)`` * ``dict({'one': 2, 'two': 3})`` * ``dict(zip(('one', 'two'), (2, 3)))`` * ``dict([['two', 3], ['one', 2]])`` The first example only works for keys that are valid Python identifiers; the others work with any valid keys. These are the operations that dictionaries support (and therefore, custom mapping types should support too): .. describe:: len(d) Return the number of items in the dictionary *d*. .. describe:: d[key] Return the item of *d* with key *key*. Raises a :exc:`KeyError` if *key* is not in the map. If a subclass of dict defines a method :meth:`__missing__`, if the key *key* is not present, the ``d[key]`` operation calls that method with the key *key* as argument. The ``d[key]`` operation then returns or raises whatever is returned or raised by the ``__missing__(key)`` call if the key is not present. No other operations or methods invoke :meth:`__missing__`. If :meth:`__missing__` is not defined, :exc:`KeyError` is raised. :meth:`__missing__` must be a method; it cannot be an instance variable. For an example, see :class:`collections.defaultdict`. .. describe:: d[key] = value Set ``d[key]`` to *value*. .. describe:: del d[key] Remove ``d[key]`` from *d*. Raises a :exc:`KeyError` if *key* is not in the map. .. describe:: key in d Return ``True`` if *d* has a key *key*, else ``False``. .. describe:: key not in d Equivalent to ``not key in d``. .. method:: clear() Remove all items from the dictionary. .. method:: copy() Return a shallow copy of the dictionary. .. method:: fromkeys(seq[, value]) Create a new dictionary with keys from *seq* and values set to *value*. :meth:`fromkeys` is a class method that returns a new dictionary. *value* defaults to ``None``. .. method:: get(key[, default]) Return the value for *key* if *key* is in the dictionary, else *default*. If *default* is not given, it defaults to ``None``, so that this method never raises a :exc:`KeyError`. .. method:: items() Return a new view of the dictionary's items (``(key, value)`` pairs). See below for documentation of view objects. .. method:: keys() Return a new view of the dictionary's keys. See below for documentation of view objects. .. method:: pop(key[, default]) If *key* is in the dictionary, remove it and return its value, else return *default*. If *default* is not given and *key* is not in the dictionary, a :exc:`KeyError` is raised. .. method:: popitem() Remove and return an arbitrary ``(key, value)`` pair from the dictionary. :meth:`popitem` is useful to destructively iterate over a dictionary, as often used in set algorithms. If the dictionary is empty, calling :meth:`popitem` raises a :exc:`KeyError`. .. method:: setdefault(key[, default]) If *key* is in the dictionary, return its value. If not, insert *key* with a value of *default* and return *default*. *default* defaults to ``None``. .. method:: update([other]) Update the dictionary with the key/value pairs from *other*, overwriting existing keys. Return ``None``. :meth:`update` accepts either another dictionary object or an iterable of key/value pairs (as a tuple or other iterable of length two). If keyword arguments are specified, the dictionary is then is updated with those key/value pairs: ``d.update(red=1, blue=2)``. .. method:: values() Return a new view of the dictionary's values. See below for documentation of view objects. .. _dict-views: Dictionary view objects ----------------------- The objects returned by :meth:`dict.keys`, :meth:`dict.values` and :meth:`dict.items` are *view objects*. They provide a dynamic view on the dictionary's entries, which means that when the dictionary changes, the view reflects these changes. Dictionary views can be iterated over to yield their respective data, and support membership tests: .. describe:: len(dictview) Return the number of entries in the dictionary. .. describe:: iter(dictview) Return an iterator over the keys, values or items (represented as tuples of ``(key, value)``) in the dictionary. Keys and values are iterated over in an arbitrary order which is non-random, varies across Python implementations, and depends on the dictionary's history of insertions and deletions. If keys, values and items views are iterated over with no intervening modifications to the dictionary, the order of items will directly correspond. This allows the creation of ``(value, key)`` pairs using :func:`zip`: ``pairs = zip(d.values(), d.keys())``. Another way to create the same list is ``pairs = [(v, k) for (k, v) in d.items()]``. .. describe:: x in dictview Return ``True`` if *x* is in the underlying dictionary's keys, values or items (in the latter case, *x* should be a ``(key, value)`` tuple). Keys views are set-like since their entries are unique and hashable. If all values are hashable, so that (key, value) pairs are unique and hashable, then the items view is also set-like. (Values views are not treated as set-like since the entries are generally not unique.) Then these set operations are available ("other" refers either to another view or a set): .. describe:: dictview & other Return the intersection of the dictview and the other object as a new set. .. describe:: dictview | other Return the union of the dictview and the other object as a new set. .. describe:: dictview - other Return the difference between the dictview and the other object (all elements in *dictview* that aren't in *other*) as a new set. .. describe:: dictview ^ other Return the symmetric difference (all elements either in *dictview* or *other*, but not in both) of the dictview and the other object as a new set. An example of dictionary view usage:: >>> dishes = {'eggs': 2, 'sausage': 1, 'bacon': 1, 'spam': 500} >>> keys = dishes.keys() >>> values = dishes.values() >>> # iteration >>> n = 0 >>> for val in values: ... n += val >>> print(n) 504 >>> # keys and values are iterated over in the same order >>> list(keys) ['eggs', 'bacon', 'sausage', 'spam'] >>> list(values) [2, 1, 1, 500] >>> # view objects are dynamic and reflect dict changes >>> del dishes['eggs'] >>> del dishes['sausage'] >>> list(keys) ['spam', 'bacon'] >>> # set operations >>> keys & {'eggs', 'bacon', 'salad'} {'bacon'} .. _bltin-file-objects: File Objects ============ .. index:: object: file builtin: file module: os module: socket .. XXX this is quite out of date, must be updated with "io" module File objects are implemented using C's ``stdio`` package and can be created with the built-in :func:`open` function. File objects are also returned by some other built-in functions and methods, such as :func:`os.popen` and :func:`os.fdopen` and the :meth:`makefile` method of socket objects. Temporary files can be created using the :mod:`tempfile` module, and high-level file operations such as copying, moving, and deleting files and directories can be achieved with the :mod:`shutil` module. When a file operation fails for an I/O-related reason, the exception :exc:`IOError` is raised. This includes situations where the operation is not defined for some reason, like :meth:`seek` on a tty device or writing a file opened for reading. Files have the following methods: .. method:: file.close() Close the file. A closed file cannot be read or written any more. Any operation which requires that the file be open will raise a :exc:`ValueError` after the file has been closed. Calling :meth:`close` more than once is allowed. You can avoid having to call this method explicitly if you use the :keyword:`with` statement. For example, the following code will automatically close *f* when the :keyword:`with` block is exited:: from __future__ import with_statement # This isn't required in Python 2.6 with open("hello.txt") as f: for line in f: print(line) In older versions of Python, you would have needed to do this to get the same effect:: f = open("hello.txt") try: for line in f: print(line) finally: f.close() .. note:: Not all "file-like" types in Python support use as a context manager for the :keyword:`with` statement. If your code is intended to work with any file-like object, you can use the function :func:`contextlib.closing` instead of using the object directly. .. method:: file.flush() Flush the internal buffer, like ``stdio``'s :cfunc:`fflush`. This may be a no-op on some file-like objects. .. method:: file.fileno() .. index:: pair: file; descriptor module: fcntl Return the integer "file descriptor" that is used by the underlying implementation to request I/O operations from the operating system. This can be useful for other, lower level interfaces that use file descriptors, such as the :mod:`fcntl` module or :func:`os.read` and friends. .. note:: File-like objects which do not have a real file descriptor should *not* provide this method! .. method:: file.isatty() Return ``True`` if the file is connected to a tty(-like) device, else ``False``. .. note:: If a file-like object is not associated with a real file, this method should *not* be implemented. .. method:: file.__next__() A file object is its own iterator, for example ``iter(f)`` returns *f* (unless *f* is closed). When a file is used as an iterator, typically in a :keyword:`for` loop (for example, ``for line in f: print(line)``), the :meth:`__next__` method is called repeatedly. This method returns the next input line, or raises :exc:`StopIteration` when EOF is hit when the file is open for reading (behavior is undefined when the file is open for writing). In order to make a :keyword:`for` loop the most efficient way of looping over the lines of a file (a very common operation), the :meth:`__next__` method uses a hidden read-ahead buffer. As a consequence of using a read-ahead buffer, combining :meth:`__next__` with other file methods (like :meth:`readline`) does not work right. However, using :meth:`seek` to reposition the file to an absolute position will flush the read-ahead buffer. .. method:: file.read([size]) Read at most *size* bytes from the file (less if the read hits EOF before obtaining *size* bytes). If the *size* argument is negative or omitted, read all data until EOF is reached. The bytes are returned as a string object. An empty string is returned when EOF is encountered immediately. (For certain files, like ttys, it makes sense to continue reading after an EOF is hit.) Note that this method may call the underlying C function :cfunc:`fread` more than once in an effort to acquire as close to *size* bytes as possible. Also note that when in non-blocking mode, less data than was requested may be returned, even if no *size* parameter was given. .. method:: file.readline([size]) Read one entire line from the file. A trailing newline character is kept in the string (but may be absent when a file ends with an incomplete line). [#]_ If the *size* argument is present and non-negative, it is a maximum byte count (including the trailing newline) and an incomplete line may be returned. An empty string is returned *only* when EOF is encountered immediately. .. note:: Unlike ``stdio``'s :cfunc:`fgets`, the returned string contains null characters (``'\0'``) if they occurred in the input. .. method:: file.readlines([sizehint]) Read until EOF using :meth:`readline` and return a list containing the lines thus read. If the optional *sizehint* argument is present, instead of reading up to EOF, whole lines totalling approximately *sizehint* bytes (possibly after rounding up to an internal buffer size) are read. Objects implementing a file-like interface may choose to ignore *sizehint* if it cannot be implemented, or cannot be implemented efficiently. .. method:: file.seek(offset[, whence]) Set the file's current position, like ``stdio``'s :cfunc:`fseek`. The *whence* argument is optional and defaults to ``os.SEEK_SET`` or ``0`` (absolute file positioning); other values are ``os.SEEK_CUR`` or ``1`` (seek relative to the current position) and ``os.SEEK_END`` or ``2`` (seek relative to the file's end). There is no return value. For example, ``f.seek(2, os.SEEK_CUR)`` advances the position by two and ``f.seek(-3, os.SEEK_END)`` sets the position to the third to last. Note that if the file is opened for appending (mode ``'a'`` or ``'a+'``), any :meth:`seek` operations will be undone at the next write. If the file is only opened for writing in append mode (mode ``'a'``), this method is essentially a no-op, but it remains useful for files opened in append mode with reading enabled (mode ``'a+'``). If the file is opened in text mode (without ``'b'``), only offsets returned by :meth:`tell` are legal. Use of other offsets causes undefined behavior. Note that not all file objects are seekable. .. method:: file.tell() Return the file's current position, like ``stdio``'s :cfunc:`ftell`. .. note:: On Windows, :meth:`tell` can return illegal values (after an :cfunc:`fgets`) when reading files with Unix-style line-endings. Use binary mode (``'rb'``) to circumvent this problem. .. method:: file.truncate([size]) Truncate the file's size. If the optional *size* argument is present, the file is truncated to (at most) that size. The size defaults to the current position. The current file position is not changed. Note that if a specified size exceeds the file's current size, the result is platform-dependent: possibilities include that the file may remain unchanged, increase to the specified size as if zero-filled, or increase to the specified size with undefined new content. Availability: Windows, many Unix variants. .. method:: file.write(str) Write a string to the file. Due to buffering, the string may not actually show up in the file until the :meth:`flush` or :meth:`close` method is called. The meaning of the return value is not defined for every file-like object. Some (mostly low-level) file-like objects may return the number of bytes actually written, others return ``None``. .. method:: file.writelines(sequence) Write a sequence of strings to the file. The sequence can be any iterable object producing strings, typically a list of strings. There is no return value. (The name is intended to match :meth:`readlines`; :meth:`writelines` does not add line separators.) Files support the iterator protocol. Each iteration returns the same result as ``file.readline()``, and iteration ends when the :meth:`readline` method returns an empty string. File objects also offer a number of other interesting attributes. These are not required for file-like objects, but should be implemented if they make sense for the particular object. .. attribute:: file.closed bool indicating the current state of the file object. This is a read-only attribute; the :meth:`close` method changes the value. It may not be available on all file-like objects. .. XXX does this still apply? .. attribute:: file.encoding The encoding that this file uses. When strings are written to a file, they will be converted to byte strings using this encoding. In addition, when the file is connected to a terminal, the attribute gives the encoding that the terminal is likely to use (that information might be incorrect if the user has misconfigured the terminal). The attribute is read-only and may not be present on all file-like objects. It may also be ``None``, in which case the file uses the system default encoding for converting strings. .. attribute:: file.errors The Unicode error handler used along with the encoding. .. attribute:: file.mode The I/O mode for the file. If the file was created using the :func:`open` built-in function, this will be the value of the *mode* parameter. This is a read-only attribute and may not be present on all file-like objects. .. attribute:: file.name If the file object was created using :func:`open`, the name of the file. Otherwise, some string that indicates the source of the file object, of the form ``<...>``. This is a read-only attribute and may not be present on all file-like objects. .. attribute:: file.newlines If Python was built with the :option:`--with-universal-newlines` option to :program:`configure` (the default) this read-only attribute exists, and for files opened in universal newline read mode it keeps track of the types of newlines encountered while reading the file. The values it can take are ``'\r'``, ``'\n'``, ``'\r\n'``, ``None`` (unknown, no newlines read yet) or a tuple containing all the newline types seen, to indicate that multiple newline conventions were encountered. For files not opened in universal newline read mode the value of this attribute will be ``None``. .. _typememoryview: memoryview Types ================ :class:`memoryview`\s allow Python code to access the internal data of an object that supports the buffer protocol without copying. Memory can be interpreted as simple bytes or complex data structures. .. class:: memoryview(obj) Create a :class:`memoryview` that references *obj*. *obj* must support the buffer protocol. Builtin objects that support the buffer protocol include :class:`bytes` and :class:`bytearray`. ``len(view)`` returns the total number of bytes in the memoryview, *view*. A :class:`memoryview` supports slicing to expose its data. Taking a single index will return a single byte. Full slicing will result in a subview:: >>> v = memoryview(b'abcefg') >>> v[1] b'b' >>> v[-1] b'g' >>> v[1:4] >>> bytes(v[1:4]) b'bce' >>> v[3:-1] >>> bytes(v[4:-1]) If the object the memory view is over supports changing its data, the memoryview supports slice assignment:: >>> data = bytearray(b'abcefg') >>> v = memoryview(data) >>> v.readonly False >>> v[0] = 'z' >>> data bytearray(b'zbcefg') >>> v[1:4] = b'123' >>> data bytearray(b'a123fg') >>> v[2] = b'spam' Traceback (most recent call last): File "", line 1, in ValueError: cannot modify size of memoryview object Notice how the size of the memoryview object can not be changed. :class:`memoryview` has two methods: .. method:: tobytes() Return the data in the buffer as a bytestring. .. method:: tolist() Return the data in the buffer as a list of integers. :: >>> memoryview(b'abc').tolist() [97, 98, 99] There are also several readonly attributes available: .. attribute:: format A string containing the format (in :mod:`struct` module style) for each element in the view. This defaults to ``'B'``, a simple bytestring. .. attribute:: itemsize The size in bytes of each element of the memoryview. .. attribute:: shape A tuple of integers the length of :attr:`ndim` giving the shape of the memory as a N-dimensional array. .. attribute:: ndim An integer indicating how many dimensions of a multi-dimensional array the memory represents. .. attribute:: strides A tuple of integers the length of :attr:`ndim` giving the size in bytes to access each element for each dimension of the array. .. memoryview.suboffsets isn't documented because it only seems useful for C .. _typecontextmanager: Context Manager Types ===================== .. index:: single: context manager single: context management protocol single: protocol; context management Python's :keyword:`with` statement supports the concept of a runtime context defined by a context manager. This is implemented using two separate methods that allow user-defined classes to define a runtime context that is entered before the statement body is executed and exited when the statement ends. The :dfn:`context management protocol` consists of a pair of methods that need to be provided for a context manager object to define a runtime context: .. method:: contextmanager.__enter__() Enter the runtime context and return either this object or another object related to the runtime context. The value returned by this method is bound to the identifier in the :keyword:`as` clause of :keyword:`with` statements using this context manager. An example of a context manager that returns itself is a file object. File objects return themselves from __enter__() to allow :func:`open` to be used as the context expression in a :keyword:`with` statement. An example of a context manager that returns a related object is the one returned by :func:`decimal.localcontext`. These managers set the active decimal context to a copy of the original decimal context and then return the copy. This allows changes to be made to the current decimal context in the body of the :keyword:`with` statement without affecting code outside the :keyword:`with` statement. .. method:: contextmanager.__exit__(exc_type, exc_val, exc_tb) Exit the runtime context and return a Boolean flag indicating if any exception that occurred should be suppressed. If an exception occurred while executing the body of the :keyword:`with` statement, the arguments contain the exception type, value and traceback information. Otherwise, all three arguments are ``None``. Returning a true value from this method will cause the :keyword:`with` statement to suppress the exception and continue execution with the statement immediately following the :keyword:`with` statement. Otherwise the exception continues propagating after this method has finished executing. Exceptions that occur during execution of this method will replace any exception that occurred in the body of the :keyword:`with` statement. The exception passed in should never be reraised explicitly - instead, this method should return a false value to indicate that the method completed successfully and does not want to suppress the raised exception. This allows context management code (such as ``contextlib.nested``) to easily detect whether or not an :meth:`__exit__` method has actually failed. Python defines several context managers to support easy thread synchronisation, prompt closure of files or other objects, and simpler manipulation of the active decimal arithmetic context. The specific types are not treated specially beyond their implementation of the context management protocol. See the :mod:`contextlib` module for some examples. Python's :term:`generator`\s and the ``contextlib.contextfactory`` :term:`decorator` provide a convenient way to implement these protocols. If a generator function is decorated with the ``contextlib.contextfactory`` decorator, it will return a context manager implementing the necessary :meth:`__enter__` and :meth:`__exit__` methods, rather than the iterator produced by an undecorated generator function. Note that there is no specific slot for any of these methods in the type structure for Python objects in the Python/C API. Extension types wanting to define these methods must provide them as a normal Python accessible method. Compared to the overhead of setting up the runtime context, the overhead of a single class dictionary lookup is negligible. .. _typesother: Other Built-in Types ==================== The interpreter supports several other kinds of objects. Most of these support only one or two operations. .. _typesmodules: Modules ------- The only special operation on a module is attribute access: ``m.name``, where *m* is a module and *name* accesses a name defined in *m*'s symbol table. Module attributes can be assigned to. (Note that the :keyword:`import` statement is not, strictly speaking, an operation on a module object; ``import foo`` does not require a module object named *foo* to exist, rather it requires an (external) *definition* for a module named *foo* somewhere.) A special member of every module is :attr:`__dict__`. This is the dictionary containing the module's symbol table. Modifying this dictionary will actually change the module's symbol table, but direct assignment to the :attr:`__dict__` attribute is not possible (you can write ``m.__dict__['a'] = 1``, which defines ``m.a`` to be ``1``, but you can't write ``m.__dict__ = {}``). Modifying :attr:`__dict__` directly is not recommended. Modules built into the interpreter are written like this: ````. If loaded from a file, they are written as ````. .. _typesobjects: Classes and Class Instances --------------------------- See :ref:`objects` and :ref:`class` for these. .. _typesfunctions: Functions --------- Function objects are created by function definitions. The only operation on a function object is to call it: ``func(argument-list)``. There are really two flavors of function objects: built-in functions and user-defined functions. Both support the same operation (to call the function), but the implementation is different, hence the different object types. See :ref:`function` for more information. .. _typesmethods: Methods ------- .. index:: object: method Methods are functions that are called using the attribute notation. There are two flavors: built-in methods (such as :meth:`append` on lists) and class instance methods. Built-in methods are described with the types that support them. If you access a method (a function defined in a class namespace) through an instance, you get a special object: a :dfn:`bound method` (also called :dfn:`instance method`) object. When called, it will add the ``self`` argument to the argument list. Bound methods have two special read-only attributes: ``m.__self__`` is the object on which the method operates, and ``m.__func__`` is the function implementing the method. Calling ``m(arg-1, arg-2, ..., arg-n)`` is completely equivalent to calling ``m.__func__(m.__self__, arg-1, arg-2, ..., arg-n)``. Like function objects, bound method objects support getting arbitrary attributes. However, since method attributes are actually stored on the underlying function object (``meth.__func__``), setting method attributes on bound methods is disallowed. Attempting to set a method attribute results in a :exc:`TypeError` being raised. In order to set a method attribute, you need to explicitly set it on the underlying function object:: class C: def method(self): pass c = C() c.method.__func__.whoami = 'my name is c' See :ref:`types` for more information. .. _bltin-code-objects: Code Objects ------------ .. index:: object: code .. index:: builtin: compile single: __code__ (function object attribute) Code objects are used by the implementation to represent "pseudo-compiled" executable Python code such as a function body. They differ from function objects because they don't contain a reference to their global execution environment. Code objects are returned by the built-in :func:`compile` function and can be extracted from function objects through their :attr:`__code__` attribute. See also the :mod:`code` module. .. index:: builtin: exec builtin: eval A code object can be executed or evaluated by passing it (instead of a source string) to the :func:`exec` or :func:`eval` built-in functions. See :ref:`types` for more information. .. _bltin-type-objects: Type Objects ------------ .. index:: builtin: type module: types Type objects represent the various object types. An object's type is accessed by the built-in function :func:`type`. There are no special operations on types. The standard module :mod:`types` defines names for all standard built-in types. Types are written like this: ````. .. _bltin-null-object: The Null Object --------------- This object is returned by functions that don't explicitly return a value. It supports no special operations. There is exactly one null object, named ``None`` (a built-in name). It is written as ``None``. .. _bltin-ellipsis-object: The Ellipsis Object ------------------- This object is commonly used by slicing (see :ref:`slicings`). It supports no special operations. There is exactly one ellipsis object, named :const:`Ellipsis` (a built-in name). It is written as ``Ellipsis`` or ``...``. Boolean Values -------------- Boolean values are the two constant objects ``False`` and ``True``. They are used to represent truth values (although other values can also be considered false or true). In numeric contexts (for example when used as the argument to an arithmetic operator), they behave like the integers 0 and 1, respectively. The built-in function :func:`bool` can be used to cast any value to a Boolean, if the value can be interpreted as a truth value (see section Truth Value Testing above). .. index:: single: False single: True pair: Boolean; values They are written as ``False`` and ``True``, respectively. .. _typesinternal: Internal Objects ---------------- See :ref:`types` for this information. It describes stack frame objects, traceback objects, and slice objects. .. _specialattrs: Special Attributes ================== The implementation adds a few special read-only attributes to several object types, where they are relevant. Some of these are not reported by the :func:`dir` built-in function. .. attribute:: object.__dict__ A dictionary or other mapping object used to store an object's (writable) attributes. .. attribute:: instance.__class__ The class to which a class instance belongs. .. attribute:: class.__bases__ The tuple of base classes of a class object. If there are no base classes, this will be an empty tuple. .. attribute:: class.__name__ The name of the class or type. .. rubric:: Footnotes .. [#] Additional information on these special methods may be found in the Python Reference Manual (:ref:`customization`). .. [#] As a consequence, the list ``[1, 2]`` is considered equal to ``[1.0, 2.0]``, and similarly for tuples. .. [#] They must have since the parser can't tell the type of the operands. .. [#] To format only a tuple you should therefore provide a singleton tuple whose only element is the tuple to be formatted. .. [#] These numbers are fairly arbitrary. They are intended to avoid printing endless strings of meaningless digits without hampering correct use and without having to know the exact precision of floating point values on a particular machine. .. [#] The advantage of leaving the newline on is that returning an empty string is then an unambiguous EOF indication. It is also possible (in cases where it might matter, for example, if you want to make an exact copy of a file while scanning its lines) to tell whether the last line of a file ended in a newline or not (yes this happens!).