:mod:`unittest` --- Unit testing framework ========================================== .. module:: unittest :synopsis: Unit testing framework for Python. .. moduleauthor:: Steve Purcell .. sectionauthor:: Steve Purcell .. sectionauthor:: Fred L. Drake, Jr. .. sectionauthor:: Raymond Hettinger .. versionadded:: 2.1 The Python unit testing framework, sometimes referred to as "PyUnit," is a Python language version of JUnit, by Kent Beck and Erich Gamma. JUnit is, in turn, a Java version of Kent's Smalltalk testing framework. Each is the de facto standard unit testing framework for its respective language. :mod:`unittest` supports test automation, sharing of setup and shutdown code for tests, aggregation of tests into collections, and independence of the tests from the reporting framework. The :mod:`unittest` module provides classes that make it easy to support these qualities for a set of tests. To achieve this, :mod:`unittest` supports some important concepts: test fixture A :dfn:`test fixture` represents the preparation needed to perform one or more tests, and any associate cleanup actions. This may involve, for example, creating temporary or proxy databases, directories, or starting a server process. test case A :dfn:`test case` is the smallest unit of testing. It checks for a specific response to a particular set of inputs. :mod:`unittest` provides a base class, :class:`TestCase`, which may be used to create new test cases. test suite A :dfn:`test suite` is a collection of test cases, test suites, or both. It is used to aggregate tests that should be executed together. test runner A :dfn:`test runner` is a component which orchestrates the execution of tests and provides the outcome to the user. The runner may use a graphical interface, a textual interface, or return a special value to indicate the results of executing the tests. The test case and test fixture concepts are supported through the :class:`TestCase` and :class:`FunctionTestCase` classes; the former should be used when creating new tests, and the latter can be used when integrating existing test code with a :mod:`unittest`\ -driven framework. When building test fixtures using :class:`TestCase`, the :meth:`~TestCase.setUp` and :meth:`~TestCase.tearDown` methods can be overridden to provide initialization and cleanup for the fixture. With :class:`FunctionTestCase`, existing functions can be passed to the constructor for these purposes. When the test is run, the fixture initialization is run first; if it succeeds, the cleanup method is run after the test has been executed, regardless of the outcome of the test. Each instance of the :class:`TestCase` will only be used to run a single test method, so a new fixture is created for each test. Test suites are implemented by the :class:`TestSuite` class. This class allows individual tests and test suites to be aggregated; when the suite is executed, all tests added directly to the suite and in "child" test suites are run. A test runner is an object that provides a single method, :meth:`~TestRunner.run`, which accepts a :class:`TestCase` or :class:`TestSuite` object as a parameter, and returns a result object. The class :class:`TestResult` is provided for use as the result object. :mod:`unittest` provides the :class:`TextTestRunner` as an example test runner which reports test results on the standard error stream by default. Alternate runners can be implemented for other environments (such as graphical environments) without any need to derive from a specific class. .. seealso:: Module :mod:`doctest` Another test-support module with a very different flavor. `unittest2: A backport of new unittest features for Python 2.4-2.6 `_ Many new features were added to unittest in Python 2.7, including test discovery. unittest2 allows you to use these features with earlier versions of Python. `Simple Smalltalk Testing: With Patterns `_ Kent Beck's original paper on testing frameworks using the pattern shared by :mod:`unittest`. `Nose `_ and `py.test `_ Third-party unittest frameworks with a lighter-weight syntax for writing tests. For example, ``assert func(10) == 42``. `The Python Testing Tools Taxonomy `_ An extensive list of Python testing tools including functional testing frameworks and mock object libraries. `Testing in Python Mailing List `_ A special-interest-group for discussion of testing, and testing tools, in Python. .. _unittest-minimal-example: Basic example ------------- The :mod:`unittest` module provides a rich set of tools for constructing and running tests. This section demonstrates that a small subset of the tools suffice to meet the needs of most users. Here is a short script to test three functions from the :mod:`random` module:: import random import unittest class TestSequenceFunctions(unittest.TestCase): def setUp(self): self.seq = range(10) def test_shuffle(self): # make sure the shuffled sequence does not lose any elements random.shuffle(self.seq) self.seq.sort() self.assertEqual(self.seq, range(10)) # should raise an exception for an immutable sequence self.assertRaises(TypeError, random.shuffle, (1,2,3)) def test_choice(self): element = random.choice(self.seq) self.assertTrue(element in self.seq) def test_sample(self): with self.assertRaises(ValueError): random.sample(self.seq, 20) for element in random.sample(self.seq, 5): self.assertTrue(element in self.seq) if __name__ == '__main__': unittest.main() A testcase is created by subclassing :class:`unittest.TestCase`. The three individual tests are defined with methods whose names start with the letters ``test``. This naming convention informs the test runner about which methods represent tests. The crux of each test is a call to :meth:`~TestCase.assertEqual` to check for an expected result; :meth:`~TestCase.assertTrue` to verify a condition; or :meth:`~TestCase.assertRaises` to verify that an expected exception gets raised. These methods are used instead of the :keyword:`assert` statement so the test runner can accumulate all test results and produce a report. When a :meth:`~TestCase.setUp` method is defined, the test runner will run that method prior to each test. Likewise, if a :meth:`~TestCase.tearDown` method is defined, the test runner will invoke that method after each test. In the example, :meth:`~TestCase.setUp` was used to create a fresh sequence for each test. The final block shows a simple way to run the tests. :func:`unittest.main` provides a command line interface to the test script. When run from the command line, the above script produces an output that looks like this:: ... ---------------------------------------------------------------------- Ran 3 tests in 0.000s OK Instead of :func:`unittest.main`, there are other ways to run the tests with a finer level of control, less terse output, and no requirement to be run from the command line. For example, the last two lines may be replaced with:: suite = unittest.TestLoader().loadTestsFromTestCase(TestSequenceFunctions) unittest.TextTestRunner(verbosity=2).run(suite) Running the revised script from the interpreter or another script produces the following output:: test_choice (__main__.TestSequenceFunctions) ... ok test_sample (__main__.TestSequenceFunctions) ... ok test_shuffle (__main__.TestSequenceFunctions) ... ok ---------------------------------------------------------------------- Ran 3 tests in 0.110s OK The above examples show the most commonly used :mod:`unittest` features which are sufficient to meet many everyday testing needs. The remainder of the documentation explores the full feature set from first principles. .. _unittest-command-line-interface: Command Line Interface ---------------------- The unittest module can be used from the command line to run tests from modules, classes or even individual test methods:: python -m unittest test_module1 test_module2 python -m unittest test_module.TestClass python -m unittest test_module.TestClass.test_method You can pass in a list with any combination of module names, and fully qualified class or method names. You can run tests with more detail (higher verbosity) by passing in the -v flag:: python -m unittest -v test_module For a list of all the command line options:: python -m unittest -h .. versionchanged:: 2.7 In earlier versions it was only possible to run individual test methods and not modules or classes. failfast, catch and buffer command line options ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ unittest supports three command options. * :option:`-b` / :option:`--buffer` The standard output and standard error streams are buffered during the test run. Output during a passing test is discarded. Output is echoed normally on test fail or error and is added to the failure messages. * :option:`-c` / :option:`--catch` Control-C during the test run waits for the current test to end and then reports all the results so far. A second control-C raises the normal :exc:`KeyboardInterrupt` exception. See `Signal Handling`_ for the functions that provide this functionality. * :option:`-f` / :option:`--failfast` Stop the test run on the first error or failure. .. versionadded:: 2.7 The command line options ``-c``, ``-b`` and ``-f`` were added. The command line can also be used for test discovery, for running all of the tests in a project or just a subset. .. _unittest-test-discovery: Test Discovery -------------- .. versionadded:: 2.7 Unittest supports simple test discovery. For a project's tests to be compatible with test discovery they must all be importable from the top level directory of the project (in other words, they must all be in Python packages). Test discovery is implemented in :meth:`TestLoader.discover`, but can also be used from the command line. The basic command line usage is:: cd project_directory python -m unittest discover The ``discover`` sub-command has the following options: -v, --verbose Verbose output -s directory Directory to start discovery ('.' default) -p pattern Pattern to match test files ('test*.py' default) -t directory Top level directory of project (default to start directory) The :option:`-s`, :option:`-p`, and :option:`-t` options can be passed in as positional arguments in that order. The following two command lines are equivalent:: python -m unittest discover -s project_directory -p '*_test.py' python -m unittest discover project_directory '*_test.py' As well as being a path it is possible to pass a package name, for example ``myproject.subpackage.test``, as the start directory. The package name you supply will then be imported and its location on the filesystem will be used as the start directory. .. caution:: Test discovery loads tests by importing them. Once test discovery has found all the test files from the start directory you specify it turns the paths into package names to import. For example `foo/bar/baz.py` will be imported as ``foo.bar.baz``. If you have a package installed globally and attempt test discovery on a different copy of the package then the import *could* happen from the wrong place. If this happens test discovery will warn you and exit. If you supply the start directory as a package name rather than a path to a directory then discover assumes that whichever location it imports from is the location you intended, so you will not get the warning. Test modules and packages can customize test loading and discovery by through the `load_tests protocol`_. .. _organizing-tests: Organizing test code -------------------- The basic building blocks of unit testing are :dfn:`test cases` --- single scenarios that must be set up and checked for correctness. In :mod:`unittest`, test cases are represented by instances of :mod:`unittest`'s :class:`TestCase` class. To make your own test cases you must write subclasses of :class:`TestCase`, or use :class:`FunctionTestCase`. An instance of a :class:`TestCase`\ -derived class is an object that can completely run a single test method, together with optional set-up and tidy-up code. The testing code of a :class:`TestCase` instance should be entirely self contained, such that it can be run either in isolation or in arbitrary combination with any number of other test cases. The simplest :class:`TestCase` subclass will simply override the :meth:`~TestCase.runTest` method in order to perform specific testing code:: import unittest class DefaultWidgetSizeTestCase(unittest.TestCase): def runTest(self): widget = Widget('The widget') self.assertEqual(widget.size(), (50, 50), 'incorrect default size') Note that in order to test something, we use the one of the :meth:`assert\*` methods provided by the :class:`TestCase` base class. If the test fails, an exception will be raised, and :mod:`unittest` will identify the test case as a :dfn:`failure`. Any other exceptions will be treated as :dfn:`errors`. This helps you identify where the problem is: :dfn:`failures` are caused by incorrect results - a 5 where you expected a 6. :dfn:`Errors` are caused by incorrect code - e.g., a :exc:`TypeError` caused by an incorrect function call. The way to run a test case will be described later. For now, note that to construct an instance of such a test case, we call its constructor without arguments:: testCase = DefaultWidgetSizeTestCase() Now, such test cases can be numerous, and their set-up can be repetitive. In the above case, constructing a :class:`Widget` in each of 100 Widget test case subclasses would mean unsightly duplication. Luckily, we can factor out such set-up code by implementing a method called :meth:`~TestCase.setUp`, which the testing framework will automatically call for us when we run the test:: import unittest class SimpleWidgetTestCase(unittest.TestCase): def setUp(self): self.widget = Widget('The widget') class DefaultWidgetSizeTestCase(SimpleWidgetTestCase): def runTest(self): self.assertEqual(self.widget.size(), (50,50), 'incorrect default size') class WidgetResizeTestCase(SimpleWidgetTestCase): def runTest(self): self.widget.resize(100,150) self.assertEqual(self.widget.size(), (100,150), 'wrong size after resize') If the :meth:`~TestCase.setUp` method raises an exception while the test is running, the framework will consider the test to have suffered an error, and the :meth:`~TestCase.runTest` method will not be executed. Similarly, we can provide a :meth:`~TestCase.tearDown` method that tidies up after the :meth:`~TestCase.runTest` method has been run:: import unittest class SimpleWidgetTestCase(unittest.TestCase): def setUp(self): self.widget = Widget('The widget') def tearDown(self): self.widget.dispose() self.widget = None If :meth:`~TestCase.setUp` succeeded, the :meth:`~TestCase.tearDown` method will be run whether :meth:`~TestCase.runTest` succeeded or not. Such a working environment for the testing code is called a :dfn:`fixture`. Often, many small test cases will use the same fixture. In this case, we would end up subclassing :class:`SimpleWidgetTestCase` into many small one-method classes such as :class:`DefaultWidgetSizeTestCase`. This is time-consuming and discouraging, so in the same vein as JUnit, :mod:`unittest` provides a simpler mechanism:: import unittest class WidgetTestCase(unittest.TestCase): def setUp(self): self.widget = Widget('The widget') def tearDown(self): self.widget.dispose() self.widget = None def test_default_size(self): self.assertEqual(self.widget.size(), (50,50), 'incorrect default size') def test_resize(self): self.widget.resize(100,150) self.assertEqual(self.widget.size(), (100,150), 'wrong size after resize') Here we have not provided a :meth:`~TestCase.runTest` method, but have instead provided two different test methods. Class instances will now each run one of the :meth:`test_\*` methods, with ``self.widget`` created and destroyed separately for each instance. When creating an instance we must specify the test method it is to run. We do this by passing the method name in the constructor:: defaultSizeTestCase = WidgetTestCase('test_default_size') resizeTestCase = WidgetTestCase('test_resize') Test case instances are grouped together according to the features they test. :mod:`unittest` provides a mechanism for this: the :dfn:`test suite`, represented by :mod:`unittest`'s :class:`TestSuite` class:: widgetTestSuite = unittest.TestSuite() widgetTestSuite.addTest(WidgetTestCase('test_default_size')) widgetTestSuite.addTest(WidgetTestCase('test_resize')) For the ease of running tests, as we will see later, it is a good idea to provide in each test module a callable object that returns a pre-built test suite:: def suite(): suite = unittest.TestSuite() suite.addTest(WidgetTestCase('test_default_size')) suite.addTest(WidgetTestCase('test_resize')) return suite or even:: def suite(): tests = ['test_default_size', 'test_resize'] return unittest.TestSuite(map(WidgetTestCase, tests)) Since it is a common pattern to create a :class:`TestCase` subclass with many similarly named test functions, :mod:`unittest` provides a :class:`TestLoader` class that can be used to automate the process of creating a test suite and populating it with individual tests. For example, :: suite = unittest.TestLoader().loadTestsFromTestCase(WidgetTestCase) will create a test suite that will run ``WidgetTestCase.test_default_size()`` and ``WidgetTestCase.test_resize``. :class:`TestLoader` uses the ``'test'`` method name prefix to identify test methods automatically. Note that the order in which the various test cases will be run is determined by sorting the test function names with the built-in :func:`cmp` function. Often it is desirable to group suites of test cases together, so as to run tests for the whole system at once. This is easy, since :class:`TestSuite` instances can be added to a :class:`TestSuite` just as :class:`TestCase` instances can be added to a :class:`TestSuite`:: suite1 = module1.TheTestSuite() suite2 = module2.TheTestSuite() alltests = unittest.TestSuite([suite1, suite2]) You can place the definitions of test cases and test suites in the same modules as the code they are to test (such as :file:`widget.py`), but there are several advantages to placing the test code in a separate module, such as :file:`test_widget.py`: * The test module can be run standalone from the command line. * The test code can more easily be separated from shipped code. * There is less temptation to change test code to fit the code it tests without a good reason. * Test code should be modified much less frequently than the code it tests. * Tested code can be refactored more easily. * Tests for modules written in C must be in separate modules anyway, so why not be consistent? * If the testing strategy changes, there is no need to change the source code. .. _legacy-unit-tests: Re-using old test code ---------------------- Some users will find that they have existing test code that they would like to run from :mod:`unittest`, without converting every old test function to a :class:`TestCase` subclass. For this reason, :mod:`unittest` provides a :class:`FunctionTestCase` class. This subclass of :class:`TestCase` can be used to wrap an existing test function. Set-up and tear-down functions can also be provided. Given the following test function:: def testSomething(): something = makeSomething() assert something.name is not None # ... one can create an equivalent test case instance as follows:: testcase = unittest.FunctionTestCase(testSomething) If there are additional set-up and tear-down methods that should be called as part of the test case's operation, they can also be provided like so:: testcase = unittest.FunctionTestCase(testSomething, setUp=makeSomethingDB, tearDown=deleteSomethingDB) To make migrating existing test suites easier, :mod:`unittest` supports tests raising :exc:`AssertionError` to indicate test failure. However, it is recommended that you use the explicit :meth:`TestCase.fail\*` and :meth:`TestCase.assert\*` methods instead, as future versions of :mod:`unittest` may treat :exc:`AssertionError` differently. .. note:: Even though :class:`FunctionTestCase` can be used to quickly convert an existing test base over to a :mod:`unittest`\ -based system, this approach is not recommended. Taking the time to set up proper :class:`TestCase` subclasses will make future test refactorings infinitely easier. In some cases, the existing tests may have been written using the :mod:`doctest` module. If so, :mod:`doctest` provides a :class:`DocTestSuite` class that can automatically build :class:`unittest.TestSuite` instances from the existing :mod:`doctest`\ -based tests. .. _unittest-skipping: Skipping tests and expected failures ------------------------------------ .. versionadded:: 2.7 Unittest supports skipping individual test methods and even whole classes of tests. In addition, it supports marking a test as a "expected failure," a test that is broken and will fail, but shouldn't be counted as a failure on a :class:`TestResult`. Skipping a test is simply a matter of using the :func:`skip` :term:`decorator` or one of its conditional variants. Basic skipping looks like this: :: class MyTestCase(unittest.TestCase): @unittest.skip("demonstrating skipping") def test_nothing(self): self.fail("shouldn't happen") @unittest.skipIf(mylib.__version__ < (1, 3), "not supported in this library version") def test_format(self): # Tests that work for only a certain version of the library. pass @unittest.skipUnless(sys.platform.startswith("win"), "requires Windows") def test_windows_support(self): # windows specific testing code pass This is the output of running the example above in verbose mode: :: test_format (__main__.MyTestCase) ... skipped 'not supported in this library version' test_nothing (__main__.MyTestCase) ... skipped 'demonstrating skipping' test_windows_support (__main__.MyTestCase) ... skipped 'requires Windows' ---------------------------------------------------------------------- Ran 3 tests in 0.005s OK (skipped=3) Classes can be skipped just like methods: :: @skip("showing class skipping") class MySkippedTestCase(unittest.TestCase): def test_not_run(self): pass :meth:`TestCase.setUp` can also skip the test. This is useful when a resource that needs to be set up is not available. Expected failures use the :func:`expectedFailure` decorator. :: class ExpectedFailureTestCase(unittest.TestCase): @unittest.expectedFailure def test_fail(self): self.assertEqual(1, 0, "broken") It's easy to roll your own skipping decorators by making a decorator that calls :func:`skip` on the test when it wants it to be skipped. This decorator skips the test unless the passed object has a certain attribute: :: def skipUnlessHasattr(obj, attr): if hasattr(obj, attr): return lambda func: func return unittest.skip("{0!r} doesn't have {1!r}".format(obj, attr)) The following decorators implement test skipping and expected failures: .. function:: skip(reason) Unconditionally skip the decorated test. *reason* should describe why the test is being skipped. .. function:: skipIf(condition, reason) Skip the decorated test if *condition* is true. .. function:: skipUnless(condition, reason) Skip the decoratored test unless *condition* is true. .. function:: expectedFailure Mark the test as an expected failure. If the test fails when run, the test is not counted as a failure. Skipped tests will not have :meth:`setUp` or :meth:`tearDown` run around them. Skipped classes will not have :meth:`setUpClass` or :meth:`tearDownClass` run. .. _unittest-contents: Classes and functions --------------------- This section describes in depth the API of :mod:`unittest`. .. _testcase-objects: Test cases ~~~~~~~~~~ .. class:: TestCase([methodName]) Instances of the :class:`TestCase` class represent the smallest testable units in the :mod:`unittest` universe. This class is intended to be used as a base class, with specific tests being implemented by concrete subclasses. This class implements the interface needed by the test runner to allow it to drive the test, and methods that the test code can use to check for and report various kinds of failure. Each instance of :class:`TestCase` will run a single test method: the method named *methodName*. If you remember, we had an earlier example that went something like this:: def suite(): suite = unittest.TestSuite() suite.addTest(WidgetTestCase('test_default_size')) suite.addTest(WidgetTestCase('test_resize')) return suite Here, we create two instances of :class:`WidgetTestCase`, each of which runs a single test. *methodName* defaults to :meth:`runTest`. :class:`TestCase` instances provide three groups of methods: one group used to run the test, another used by the test implementation to check conditions and report failures, and some inquiry methods allowing information about the test itself to be gathered. Methods in the first group (running the test) are: .. method:: setUp() Method called to prepare the test fixture. This is called immediately before calling the test method; any exception raised by this method will be considered an error rather than a test failure. The default implementation does nothing. .. method:: tearDown() Method called immediately after the test method has been called and the result recorded. This is called even if the test method raised an exception, so the implementation in subclasses may need to be particularly careful about checking internal state. Any exception raised by this method will be considered an error rather than a test failure. This method will only be called if the :meth:`setUp` succeeds, regardless of the outcome of the test method. The default implementation does nothing. .. method:: setUpClass() A class method called before tests in an individual class run. ``setUpClass`` is called with the class as the only argument and must be decorated as a :func:`classmethod`:: @classmethod def setUpClass(cls): ... See `Class and Module Fixtures`_ for more details. .. versionadded:: 2.7 .. method:: tearDownClass() A class method called after tests in an individual class have run. ``tearDownClass`` is called with the class as the only argument and must be decorated as a :meth:`classmethod`:: @classmethod def tearDownClass(cls): ... See `Class and Module Fixtures`_ for more details. .. versionadded:: 2.7 .. method:: run([result]) Run the test, collecting the result into the test result object passed as *result*. If *result* is omitted or :const:`None`, a temporary result object is created (by calling the :meth:`defaultTestResult` method) and used. The result object is not returned to :meth:`run`'s caller. The same effect may be had by simply calling the :class:`TestCase` instance. .. method:: skipTest(reason) Calling this during a test method or :meth:`setUp` skips the current test. See :ref:`unittest-skipping` for more information. .. versionadded:: 2.7 .. method:: debug() Run the test without collecting the result. This allows exceptions raised by the test to be propagated to the caller, and can be used to support running tests under a debugger. The test code can use any of the following methods to check for and report failures. .. method:: assertTrue(expr[, msg]) assert_(expr[, msg]) failUnless(expr[, msg]) Signal a test failure if *expr* is false; the explanation for the failure will be *msg* if given, otherwise it will be :const:`None`. .. deprecated:: 2.7 :meth:`failUnless` and :meth:`assert_`; use :meth:`assertTrue`. .. method:: assertEqual(first, second[, msg]) failUnlessEqual(first, second[, msg]) Test that *first* and *second* are equal. If the values do not compare equal, the test will fail with the explanation given by *msg*, or :const:`None`. Note that using :meth:`assertEqual` improves upon doing the comparison as the first parameter to :meth:`assertTrue`: the default value for *msg* include representations of both *first* and *second*. In addition, if *first* and *second* are the exact same type and one of list, tuple, dict, set, frozenset or unicode or any type that a subclass registers with :meth:`addTypeEqualityFunc` the type specific equality function will be called in order to generate a more useful default error message. .. versionchanged:: 2.7 Added the automatic calling of type specific equality function. .. deprecated:: 2.7 :meth:`failUnlessEqual`; use :meth:`assertEqual`. .. method:: assertNotEqual(first, second[, msg]) failIfEqual(first, second[, msg]) Test that *first* and *second* are not equal. If the values do compare equal, the test will fail with the explanation given by *msg*, or :const:`None`. Note that using :meth:`assertNotEqual` improves upon doing the comparison as the first parameter to :meth:`assertTrue` is that the default value for *msg* can be computed to include representations of both *first* and *second*. .. deprecated:: 2.7 :meth:`failIfEqual`; use :meth:`assertNotEqual`. .. method:: assertAlmostEqual(first, second[, places[, msg[, delta]]]) failUnlessAlmostEqual(first, second[, places[, msg[, delta]]]) Test that *first* and *second* are approximately equal by computing the difference, rounding to the given number of decimal *places* (default 7), and comparing to zero. Note that comparing a given number of decimal places is not the same as comparing a given number of significant digits. If the values do not compare equal, the test will fail with the explanation given by *msg*, or :const:`None`. If *delta* is supplied instead of *places* then the difference between *first* and *second* must be less than *delta*. Supplying both *delta* and *places* raises a ``TypeError``. .. versionchanged:: 2.7 Objects that compare equal are automatically almost equal. Added the ``delta`` keyword argument. .. deprecated:: 2.7 :meth:`failUnlessAlmostEqual`; use :meth:`assertAlmostEqual`. .. method:: assertNotAlmostEqual(first, second[, places[, msg[, delta]]]) failIfAlmostEqual(first, second[, places[, msg[, delta]]]) Test that *first* and *second* are not approximately equal by computing the difference, rounding to the given number of decimal *places* (default 7), and comparing to zero. Note that comparing a given number of decimal places is not the same as comparing a given number of significant digits. If the values do not compare equal, the test will fail with the explanation given by *msg*, or :const:`None`. If *delta* is supplied instead of *places* then the difference between *first* and *second* must be more than *delta*. Supplying both *delta* and *places* raises a ``TypeError``. .. versionchanged:: 2.7 Objects that compare equal automatically fail. Added the ``delta`` keyword argument. .. deprecated:: 2.7 :meth:`failIfAlmostEqual`; use :meth:`assertNotAlmostEqual`. .. method:: assertGreater(first, second, msg=None) assertGreaterEqual(first, second, msg=None) assertLess(first, second, msg=None) assertLessEqual(first, second, msg=None) Test that *first* is respectively >, >=, < or <= than *second* depending on the method name. If not, the test will fail with an explanation or with the explanation given by *msg*:: >>> self.assertGreaterEqual(3, 4) AssertionError: "3" unexpectedly not greater than or equal to "4" .. versionadded:: 2.7 .. method:: assertMultiLineEqual(self, first, second, msg=None) Test that the multiline string *first* is equal to the string *second*. When not equal a diff of the two strings highlighting the differences will be included in the error message. This method is used by default when comparing Unicode strings with :meth:`assertEqual`. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertRegexpMatches(text, regexp, msg=None) Verifies that a *regexp* search matches *text*. Fails with an error message including the pattern and the *text*. *regexp* may be a regular expression object or a string containing a regular expression suitable for use by :func:`re.search`. .. versionadded:: 2.7 .. method:: assertNotRegexpMatches(text, regexp, msg=None) Verifies that a *regexp* search does not match *text*. Fails with an error message including the pattern and the part of *text* that matches. *regexp* may be a regular expression object or a string containing a regular expression suitable for use by :func:`re.search`. .. versionadded:: 2.7 .. method:: assertIn(first, second, msg=None) assertNotIn(first, second, msg=None) Tests that *first* is or is not in *second* with an explanatory error message as appropriate. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertItemsEqual(actual, expected, msg=None) Test that sequence *expected* contains the same elements as *actual*, regardless of their order. When they don't, an error message listing the differences between the sequences will be generated. Duplicate elements are *not* ignored when comparing *actual* and *expected*. It verifies if each element has the same count in both sequences. It is the equivalent of ``assertEqual(sorted(expected), sorted(actual))`` but it works with sequences of unhashable objects as well. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertSetEqual(set1, set2, msg=None) Tests that two sets are equal. If not, an error message is constructed that lists the differences between the sets. This method is used by default when comparing sets or frozensets with :meth:`assertEqual`. Fails if either of *set1* or *set2* does not have a :meth:`set.difference` method. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertDictEqual(expected, actual, msg=None) Test that two dictionaries are equal. If not, an error message is constructed that shows the differences in the dictionaries. This method will be used by default to compare dictionaries in calls to :meth:`assertEqual`. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertDictContainsSubset(expected, actual, msg=None) Tests whether the key/value pairs in dictionary *actual* are a superset of those in *expected*. If not, an error message listing the missing keys and mismatched values is generated. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertListEqual(list1, list2, msg=None) assertTupleEqual(tuple1, tuple2, msg=None) Tests that two lists or tuples are equal. If not an error message is constructed that shows only the differences between the two. An error is also raised if either of the parameters are of the wrong type. These methods are used by default when comparing lists or tuples with :meth:`assertEqual`. If specified, *msg* will be used as the error message on failure. .. versionadded:: 2.7 .. method:: assertSequenceEqual(seq1, seq2, msg=None, seq_type=None) Tests that two sequences are equal. If a *seq_type* is supplied, both *seq1* and *seq2* must be instances of *seq_type* or a failure will be raised. If the sequences are different an error message is constructed that shows the difference between the two. If specified, *msg* will be used as the error message on failure. This method is used to implement :meth:`assertListEqual` and :meth:`assertTupleEqual`. .. versionadded:: 2.7 .. method:: assertRaises(exception[, callable, ...]) failUnlessRaises(exception[, callable, ...]) Test that an exception is raised when *callable* is called with any positional or keyword arguments that are also passed to :meth:`assertRaises`. The test passes if *exception* is raised, is an error if another exception is raised, or fails if no exception is raised. To catch any of a group of exceptions, a tuple containing the exception classes may be passed as *exception*. If *callable* is omitted or None, returns a context manager so that the code under test can be written inline rather than as a function:: with self.assertRaises(SomeException): do_something() The context manager will store the caught exception object in its :attr:`exception` attribute. This can be useful if the intention is to perform additional checks on the exception raised:: with self.assertRaises(SomeException) as cm: do_something() the_exception = cm.exception self.assertEqual(the_exception.error_code, 3) .. versionchanged:: 2.7 Added the ability to use :meth:`assertRaises` as a context manager. .. deprecated:: 2.7 :meth:`failUnlessRaises`; use :meth:`assertRaises`. .. method:: assertRaisesRegexp(exception, regexp[, callable, ...]) Like :meth:`assertRaises` but also tests that *regexp* matches on the string representation of the raised exception. *regexp* may be a regular expression object or a string containing a regular expression suitable for use by :func:`re.search`. Examples:: self.assertRaisesRegexp(ValueError, 'invalid literal for.*XYZ$', int, 'XYZ') or:: with self.assertRaisesRegexp(ValueError, 'literal'): int('XYZ') .. versionadded:: 2.7 .. method:: assertIsNone(expr[, msg]) This signals a test failure if *expr* is not None. .. versionadded:: 2.7 .. method:: assertIsNotNone(expr[, msg]) The inverse of the :meth:`assertIsNone` method. This signals a test failure if *expr* is None. .. versionadded:: 2.7 .. method:: assertIs(expr1, expr2[, msg]) This signals a test failure if *expr1* and *expr2* don't evaluate to the same object. .. versionadded:: 2.7 .. method:: assertIsNot(expr1, expr2[, msg]) The inverse of the :meth:`assertIs` method. This signals a test failure if *expr1* and *expr2* evaluate to the same object. .. versionadded:: 2.7 .. method:: assertIsInstance(obj, cls[, msg]) This signals a test failure if *obj* is not an instance of *cls* (which can be a class or a tuple of classes, as supported by :func:`isinstance`). .. versionadded:: 2.7 .. method:: assertNotIsInstance(obj, cls[, msg]) The inverse of the :meth:`assertIsInstance` method. This signals a test failure if *obj* is an instance of *cls*. .. versionadded:: 2.7 .. method:: assertFalse(expr[, msg]) failIf(expr[, msg]) The inverse of the :meth:`assertTrue` method is the :meth:`assertFalse` method. This signals a test failure if *expr* is true, with *msg* or :const:`None` for the error message. .. deprecated:: 2.7 :meth:`failIf`; use :meth:`assertFalse`. .. method:: fail([msg]) Signals a test failure unconditionally, with *msg* or :const:`None` for the error message. .. attribute:: failureException This class attribute gives the exception raised by the test method. If a test framework needs to use a specialized exception, possibly to carry additional information, it must subclass this exception in order to "play fair" with the framework. The initial value of this attribute is :exc:`AssertionError`. .. attribute:: longMessage If set to True then any explicit failure message you pass in to the assert methods will be appended to the end of the normal failure message. The normal messages contain useful information about the objects involved, for example the message from assertEqual shows you the repr of the two unequal objects. Setting this attribute to True allows you to have a custom error message in addition to the normal one. This attribute defaults to False, meaning that a custom message passed to an assert method will silence the normal message. The class setting can be overridden in individual tests by assigning an instance attribute to True or False before calling the assert methods. .. versionadded:: 2.7 .. attribute:: maxDiff This attribute controls the maximum length of diffs output by assert methods that report diffs on failure. It defaults to 80*8 characters. Assert methods affected by this attribute are :meth:`assertSequenceEqual` (including all the sequence comparison methods that delegate to it), :meth:`assertDictEqual` and :meth:`assertMultiLineEqual`. Setting ``maxDiff`` to None means that there is no maximum length of diffs. .. versionadded:: 2.7 Testing frameworks can use the following methods to collect information on the test: .. method:: countTestCases() Return the number of tests represented by this test object. For :class:`TestCase` instances, this will always be ``1``. .. method:: defaultTestResult() Return an instance of the test result class that should be used for this test case class (if no other result instance is provided to the :meth:`run` method). For :class:`TestCase` instances, this will always be an instance of :class:`TestResult`; subclasses of :class:`TestCase` should override this as necessary. .. method:: id() Return a string identifying the specific test case. This is usually the full name of the test method, including the module and class name. .. method:: shortDescription() Returns a description of the test, or :const:`None` if no description has been provided. The default implementation of this method returns the first line of the test method's docstring, if available, or :const:`None`. .. method:: addTypeEqualityFunc(typeobj, function) Registers a type specific :meth:`assertEqual` equality checking function to be called by :meth:`assertEqual` when both objects it has been asked to compare are exactly *typeobj* (not subclasses). *function* must take two positional arguments and a third msg=None keyword argument just as :meth:`assertEqual` does. It must raise ``self.failureException`` when inequality between the first two parameters is detected. One good use of custom equality checking functions for a type is to raise ``self.failureException`` with an error message useful for debugging the problem by explaining the inequalities in detail. .. versionadded:: 2.7 .. method:: addCleanup(function[, *args[, **kwargs]]) Add a function to be called after :meth:`tearDown` to cleanup resources used during the test. Functions will be called in reverse order to the order they are added (LIFO). They are called with any arguments and keyword arguments passed into :meth:`addCleanup` when they are added. If :meth:`setUp` fails, meaning that :meth:`tearDown` is not called, then any cleanup functions added will still be called. .. versionadded:: 2.7 .. method:: doCleanups() This method is called unconditionally after :meth:`tearDown`, or after :meth:`setUp` if :meth:`setUp` raises an exception. It is responsible for calling all the cleanup functions added by :meth:`addCleanup`. If you need cleanup functions to be called *prior* to :meth:`tearDown` then you can call :meth:`doCleanups` yourself. :meth:`doCleanups` pops methods off the stack of cleanup functions one at a time, so it can be called at any time. .. versionadded:: 2.7 .. class:: FunctionTestCase(testFunc[, setUp[, tearDown[, description]]]) This class implements the portion of the :class:`TestCase` interface which allows the test runner to drive the test, but does not provide the methods which test code can use to check and report errors. This is used to create test cases using legacy test code, allowing it to be integrated into a :mod:`unittest`-based test framework. .. _testsuite-objects: Grouping tests ~~~~~~~~~~~~~~ .. class:: TestSuite([tests]) This class represents an aggregation of individual tests cases and test suites. The class presents the interface needed by the test runner to allow it to be run as any other test case. Running a :class:`TestSuite` instance is the same as iterating over the suite, running each test individually. If *tests* is given, it must be an iterable of individual test cases or other test suites that will be used to build the suite initially. Additional methods are provided to add test cases and suites to the collection later on. :class:`TestSuite` objects behave much like :class:`TestCase` objects, except they do not actually implement a test. Instead, they are used to aggregate tests into groups of tests that should be run together. Some additional methods are available to add tests to :class:`TestSuite` instances: .. method:: TestSuite.addTest(test) Add a :class:`TestCase` or :class:`TestSuite` to the suite. .. method:: TestSuite.addTests(tests) Add all the tests from an iterable of :class:`TestCase` and :class:`TestSuite` instances to this test suite. This is equivalent to iterating over *tests*, calling :meth:`addTest` for each element. :class:`TestSuite` shares the following methods with :class:`TestCase`: .. method:: run(result) Run the tests associated with this suite, collecting the result into the test result object passed as *result*. Note that unlike :meth:`TestCase.run`, :meth:`TestSuite.run` requires the result object to be passed in. .. method:: debug() Run the tests associated with this suite without collecting the result. This allows exceptions raised by the test to be propagated to the caller and can be used to support running tests under a debugger. .. method:: countTestCases() Return the number of tests represented by this test object, including all individual tests and sub-suites. .. method:: __iter__() Tests grouped by a :class:`TestSuite` are always accessed by iteration. Subclasses can lazily provide tests by overriding :meth:`__iter__`. Note that this method maybe called several times on a single suite (for example when counting tests or comparing for equality) so the tests returned must be the same for repeated iterations. .. versionchanged:: 2.7 In earlier versions the :class:`TestSuite` accessed tests directly rather than through iteration, so overriding :meth:`__iter__` wasn't sufficient for providing tests. In the typical usage of a :class:`TestSuite` object, the :meth:`run` method is invoked by a :class:`TestRunner` rather than by the end-user test harness. Loading and running tests ~~~~~~~~~~~~~~~~~~~~~~~~~ .. class:: TestLoader() The :class:`TestLoader` class is used to create test suites from classes and modules. Normally, there is no need to create an instance of this class; the :mod:`unittest` module provides an instance that can be shared as ``unittest.defaultTestLoader``. Using a subclass or instance, however, allows customization of some configurable properties. :class:`TestLoader` objects have the following methods: .. method:: loadTestsFromTestCase(testCaseClass) Return a suite of all tests cases contained in the :class:`TestCase`\ -derived :class:`testCaseClass`. .. method:: loadTestsFromModule(module) Return a suite of all tests cases contained in the given module. This method searches *module* for classes derived from :class:`TestCase` and creates an instance of the class for each test method defined for the class. .. note:: While using a hierarchy of :class:`TestCase`\ -derived classes can be convenient in sharing fixtures and helper functions, defining test methods on base classes that are not intended to be instantiated directly does not play well with this method. Doing so, however, can be useful when the fixtures are different and defined in subclasses. If a module provides a ``load_tests`` function it will be called to load the tests. This allows modules to customize test loading. This is the `load_tests protocol`_. .. versionchanged:: 2.7 Support for ``load_tests`` added. .. method:: loadTestsFromName(name[, module]) Return a suite of all tests cases given a string specifier. The specifier *name* is a "dotted name" that may resolve either to a module, a test case class, a test method within a test case class, a :class:`TestSuite` instance, or a callable object which returns a :class:`TestCase` or :class:`TestSuite` instance. These checks are applied in the order listed here; that is, a method on a possible test case class will be picked up as "a test method within a test case class", rather than "a callable object". For example, if you have a module :mod:`SampleTests` containing a :class:`TestCase`\ -derived class :class:`SampleTestCase` with three test methods (:meth:`test_one`, :meth:`test_two`, and :meth:`test_three`), the specifier ``'SampleTests.SampleTestCase'`` would cause this method to return a suite which will run all three test methods. Using the specifier ``'SampleTests.SampleTestCase.test_two'`` would cause it to return a test suite which will run only the :meth:`test_two` test method. The specifier can refer to modules and packages which have not been imported; they will be imported as a side-effect. The method optionally resolves *name* relative to the given *module*. .. method:: loadTestsFromNames(names[, module]) Similar to :meth:`loadTestsFromName`, but takes a sequence of names rather than a single name. The return value is a test suite which supports all the tests defined for each name. .. method:: getTestCaseNames(testCaseClass) Return a sorted sequence of method names found within *testCaseClass*; this should be a subclass of :class:`TestCase`. .. method:: discover(start_dir, pattern='test*.py', top_level_dir=None) Find and return all test modules from the specified start directory, recursing into subdirectories to find them. Only test files that match *pattern* will be loaded. (Using shell style pattern matching.) Only module names that are importable (i.e. are valid Python identifiers) will be loaded. All test modules must be importable from the top level of the project. If the start directory is not the top level directory then the top level directory must be specified separately. If importing a module fails, for example due to a syntax error, then this will be recorded as a single error and discovery will continue. If a test package name (directory with :file:`__init__.py`) matches the pattern then the package will be checked for a ``load_tests`` function. If this exists then it will be called with *loader*, *tests*, *pattern*. If load_tests exists then discovery does *not* recurse into the package, ``load_tests`` is responsible for loading all tests in the package. The pattern is deliberately not stored as a loader attribute so that packages can continue discovery themselves. *top_level_dir* is stored so ``load_tests`` does not need to pass this argument in to ``loader.discover()``. *start_dir* can be a dotted module name as well as a directory. .. versionadded:: 2.7 The following attributes of a :class:`TestLoader` can be configured either by subclassing or assignment on an instance: .. attribute:: testMethodPrefix String giving the prefix of method names which will be interpreted as test methods. The default value is ``'test'``. This affects :meth:`getTestCaseNames` and all the :meth:`loadTestsFrom\*` methods. .. attribute:: sortTestMethodsUsing Function to be used to compare method names when sorting them in :meth:`getTestCaseNames` and all the :meth:`loadTestsFrom\*` methods. The default value is the built-in :func:`cmp` function; the attribute can also be set to :const:`None` to disable the sort. .. attribute:: suiteClass Callable object that constructs a test suite from a list of tests. No methods on the resulting object are needed. The default value is the :class:`TestSuite` class. This affects all the :meth:`loadTestsFrom\*` methods. .. class:: TestResult This class is used to compile information about which tests have succeeded and which have failed. A :class:`TestResult` object stores the results of a set of tests. The :class:`TestCase` and :class:`TestSuite` classes ensure that results are properly recorded; test authors do not need to worry about recording the outcome of tests. Testing frameworks built on top of :mod:`unittest` may want access to the :class:`TestResult` object generated by running a set of tests for reporting purposes; a :class:`TestResult` instance is returned by the :meth:`TestRunner.run` method for this purpose. :class:`TestResult` instances have the following attributes that will be of interest when inspecting the results of running a set of tests: .. attribute:: errors A list containing 2-tuples of :class:`TestCase` instances and strings holding formatted tracebacks. Each tuple represents a test which raised an unexpected exception. .. versionchanged:: 2.2 Contains formatted tracebacks instead of :func:`sys.exc_info` results. .. attribute:: failures A list containing 2-tuples of :class:`TestCase` instances and strings holding formatted tracebacks. Each tuple represents a test where a failure was explicitly signalled using the :meth:`TestCase.fail\*` or :meth:`TestCase.assert\*` methods. .. versionchanged:: 2.2 Contains formatted tracebacks instead of :func:`sys.exc_info` results. .. attribute:: skipped A list containing 2-tuples of :class:`TestCase` instances and strings holding the reason for skipping the test. .. versionadded:: 2.7 .. attribute:: expectedFailures A list contaning 2-tuples of :class:`TestCase` instances and strings holding formatted tracebacks. Each tuple represents a expected failures of the test case. .. attribute:: unexpectedSuccesses A list containing :class:`TestCase` instances that were marked as expected failures, but succeeded. .. attribute:: shouldStop Set to ``True`` when the execution of tests should stop by :meth:`stop`. .. attribute:: testsRun The total number of tests run so far. .. attribute:: buffer If set to true, ``sys.stdout`` and ``sys.stderr`` will be buffered in between :meth:`startTest` and :meth:`stopTest` being called. Collected output will only be echoed onto the real ``sys.stdout`` and ``sys.stderr`` if the test fails or errors. Any output is also attached to the failure / error message. .. versionadded:: 2.7 .. attribute:: failfast If set to true :meth:`stop` will be called on the first failure or error, halting the test run. .. versionadded:: 2.7 .. method:: wasSuccessful() Return :const:`True` if all tests run so far have passed, otherwise returns :const:`False`. .. method:: stop() This method can be called to signal that the set of tests being run should be aborted by setting the :attr:`shouldStop` attribute to :const:`True`. :class:`TestRunner` objects should respect this flag and return without running any additional tests. For example, this feature is used by the :class:`TextTestRunner` class to stop the test framework when the user signals an interrupt from the keyboard. Interactive tools which provide :class:`TestRunner` implementations can use this in a similar manner. The following methods of the :class:`TestResult` class are used to maintain the internal data structures, and may be extended in subclasses to support additional reporting requirements. This is particularly useful in building tools which support interactive reporting while tests are being run. .. method:: startTest(test) Called when the test case *test* is about to be run. .. method:: stopTest(test) Called after the test case *test* has been executed, regardless of the outcome. .. method:: startTestRun(test) Called once before any tests are executed. .. versionadded:: 2.7 .. method:: stopTestRun(test) Called once after all tests are executed. .. versionadded:: 2.7 .. method:: addError(test, err) Called when the test case *test* raises an unexpected exception *err* is a tuple of the form returned by :func:`sys.exc_info`: ``(type, value, traceback)``. The default implementation appends a tuple ``(test, formatted_err)`` to the instance's :attr:`errors` attribute, where *formatted_err* is a formatted traceback derived from *err*. .. method:: addFailure(test, err) Called when the test case *test* signals a failure. *err* is a tuple of the form returned by :func:`sys.exc_info`: ``(type, value, traceback)``. The default implementation appends a tuple ``(test, formatted_err)`` to the instance's :attr:`failures` attribute, where *formatted_err* is a formatted traceback derived from *err*. .. method:: addSuccess(test) Called when the test case *test* succeeds. The default implementation does nothing. .. method:: addSkip(test, reason) Called when the test case *test* is skipped. *reason* is the reason the test gave for skipping. The default implementation appends a tuple ``(test, reason)`` to the instance's :attr:`skipped` attribute. .. method:: addExpectedFailure(test, err) Called when the test case *test* fails, but was marked with the :func:`expectedFailure` decorator. The default implementation appends a tuple ``(test, formatted_err)`` to the instance's :attr:`expectedFailures` attribute, where *formatted_err* is a formatted traceback derived from *err*. .. method:: addUnexpectedSuccess(test) Called when the test case *test* was marked with the :func:`expectedFailure` decorator, but succeeded. The default implementation appends the test to the instance's :attr:`unexpectedSuccesses` attribute. .. class:: TextTestResult(stream, descriptions, verbosity) A concrete implementation of :class:`TestResult` used by the :class:`TextTestRunner`. .. versionadded:: 2.7 This class was previously named ``_TextTestResult``. The old name still exists as an alias but is deprecated. .. data:: defaultTestLoader Instance of the :class:`TestLoader` class intended to be shared. If no customization of the :class:`TestLoader` is needed, this instance can be used instead of repeatedly creating new instances. .. class:: TextTestRunner([stream[, descriptions[, verbosity], [resultclass]]]) A basic test runner implementation which prints results on standard error. It has a few configurable parameters, but is essentially very simple. Graphical applications which run test suites should provide alternate implementations. .. method:: _makeResult() This method returns the instance of ``TestResult`` used by :meth:`run`. It is not intended to be called directly, but can be overridden in subclasses to provide a custom ``TestResult``. ``_makeResult()`` instantiates the class or callable passed in the ``TextTestRunner`` constructor as the ``resultclass`` argument. It defaults to :class:`TextTestResult` if no ``resultclass`` is provided. The result class is instantiated with the following arguments:: stream, descriptions, verbosity .. function:: main([module[, defaultTest[, argv[, testRunner[, testLoader[, exit[, verbosity[, failfast[, catchbreak[,buffer]]]]]]]]]]) A command-line program that runs a set of tests; this is primarily for making test modules conveniently executable. The simplest use for this function is to include the following line at the end of a test script:: if __name__ == '__main__': unittest.main() You can run tests with more detailed information by passing in the verbosity argument:: if __name__ == '__main__': unittest.main(verbosity=2) The *testRunner* argument can either be a test runner class or an already created instance of it. By default ``main`` calls :func:`sys.exit` with an exit code indicating success or failure of the tests run. ``main`` supports being used from the interactive interpreter by passing in the argument ``exit=False``. This displays the result on standard output without calling :func:`sys.exit`:: >>> from unittest import main >>> main(module='test_module', exit=False) The ``failfast``, ``catchbreak`` and ``buffer`` parameters have the same effect as the `failfast, catch and buffer command line options`_. Calling ``main`` actually returns an instance of the ``TestProgram`` class. This stores the result of the tests run as the ``result`` attribute. .. versionchanged:: 2.7 The ``exit``, ``verbosity``, ``failfast``, ``catchbreak`` and ``buffer`` parameters were added. load_tests Protocol ################### .. versionadded:: 2.7 Modules or packages can customize how tests are loaded from them during normal test runs or test discovery by implementing a function called ``load_tests``. If a test module defines ``load_tests`` it will be called by :meth:`TestLoader.loadTestsFromModule` with the following arguments:: load_tests(loader, standard_tests, None) It should return a :class:`TestSuite`. *loader* is the instance of :class:`TestLoader` doing the loading. *standard_tests* are the tests that would be loaded by default from the module. It is common for test modules to only want to add or remove tests from the standard set of tests. The third argument is used when loading packages as part of test discovery. A typical ``load_tests`` function that loads tests from a specific set of :class:`TestCase` classes may look like:: test_cases = (TestCase1, TestCase2, TestCase3) def load_tests(loader, tests, pattern): suite = TestSuite() for test_class in test_cases: tests = loader.loadTestsFromTestCase(test_class) suite.addTests(tests) return suite If discovery is started, either from the command line or by calling :meth:`TestLoader.discover`, with a pattern that matches a package name then the package :file:`__init__.py` will be checked for ``load_tests``. .. note:: The default pattern is 'test*.py'. This matches all Python files that start with 'test' but *won't* match any test directories. A pattern like 'test*' will match test packages as well as modules. If the package :file:`__init__.py` defines ``load_tests`` then it will be called and discovery not continued into the package. ``load_tests`` is called with the following arguments:: load_tests(loader, standard_tests, pattern) This should return a :class:`TestSuite` representing all the tests from the package. (``standard_tests`` will only contain tests collected from :file:`__init__.py`.) Because the pattern is passed into ``load_tests`` the package is free to continue (and potentially modify) test discovery. A 'do nothing' ``load_tests`` function for a test package would look like:: def load_tests(loader, standard_tests, pattern): # top level directory cached on loader instance this_dir = os.path.dirname(__file__) package_tests = loader.discover(start_dir=this_dir, pattern=pattern) standard_tests.addTests(package_tests) return standard_tests Class and Module Fixtures ------------------------- Class and module level fixtures are implemented in :class:`TestSuite`. When the test suite encounters a test from a new class then :meth:`tearDownClass` from the previous class (if there is one) is called, followed by :meth:`setUpClass` from the new class. Similarly if a test is from a different module from the previous test then ``tearDownModule`` from the previous module is run, followed by ``setUpModule`` from the new module. After all the tests have run the final ``tearDownClass`` and ``tearDownModule`` are run. Note that shared fixtures do not play well with [potential] features like test parallelization and they break test isolation. They should be used with care. The default ordering of tests created by the unittest test loaders is to group all tests from the same modules and classes together. This will lead to ``setUpClass`` / ``setUpModule`` (etc) being called exactly once per class and module. If you randomize the order, so that tests from different modules and classes are adjacent to each other, then these shared fixture functions may be called multiple times in a single test run. Shared fixtures are not intended to work with suites with non-standard ordering. A ``BaseTestSuite`` still exists for frameworks that don't want to support shared fixtures. If there are any exceptions raised during one of the shared fixture functions the test is reported as an error. Because there is no corresponding test instance an ``_ErrorHolder`` object (that has the same interface as a :class:`TestCase`) is created to represent the error. If you are just using the standard unittest test runner then this detail doesn't matter, but if you are a framework author it may be relevant. setUpClass and tearDownClass ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ These must be implemented as class methods:: import unittest class Test(unittest.TestCase): @classmethod def setUpClass(cls): cls._connection = createExpensiveConnectionObject() @classmethod def tearDownClass(cls): cls._connection.destroy() If you want the ``setUpClass`` and ``tearDownClass`` on base classes called then you must call up to them yourself. The implementations in :class:`TestCase` are empty. If an exception is raised during a ``setUpClass`` then the tests in the class are not run and the ``tearDownClass`` is not run. Skipped classes will not have ``setUpClass`` or ``tearDownClass`` run. If the exception is a ``SkipTest`` exception then the class will be reported as having been skipped instead of as an error. setUpModule and tearDownModule ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ These should be implemented as functions:: def setUpModule(): createConnection() def tearDownModule(): closeConnection() If an exception is raised in a ``setUpModule`` then none of the tests in the module will be run and the ``tearDownModule`` will not be run. If the exception is a ``SkipTest`` exception then the module will be reported as having been skipped instead of as an error. Signal Handling --------------- The :option:`-c`/:option:`--catch` command line option to unittest, along with the ``catchbreak`` parameter to :func:`unittest.main()`, provide more friendly handling of control-C during a test run. With catch break behavior enabled control-C will allow the currently running test to complete, and the test run will then end and report all the results so far. A second control-c will raise a :exc:`KeyboardInterrupt` in the usual way. The control-c handling signal handler attempts to remain compatible with code or tests that install their own :const:`signal.SIGINT` handler. If the ``unittest`` handler is called but *isn't* the installed :const:`signal.SIGINT` handler, i.e. it has been replaced by the system under test and delegated to, then it calls the default handler. This will normally be the expected behavior by code that replaces an installed handler and delegates to it. For individual tests that need ``unittest`` control-c handling disabled the :func:`removeHandler` decorator can be used. There are a few utility functions for framework authors to enable control-c handling functionality within test frameworks. .. function:: installHandler() Install the control-c handler. When a :const:`signal.SIGINT` is received (usually in response to the user pressing control-c) all registered results have :meth:`~TestResult.stop` called. .. versionadded:: 2.7 .. function:: registerResult(result) Register a :class:`TestResult` object for control-c handling. Registering a result stores a weak reference to it, so it doesn't prevent the result from being garbage collected. Registering a :class:`TestResult` object has no side-effects if control-c handling is not enabled, so test frameworks can unconditionally register all results they create independently of whether or not handling is enabled. .. versionadded:: 2.7 .. function:: removeResult(result) Remove a registered result. Once a result has been removed then :meth:`~TestResult.stop` will no longer be called on that result object in response to a control-c. .. versionadded:: 2.7 .. function:: removeHandler(function=None) When called without arguments this function removes the control-c handler if it has been installed. This function can also be used as a test decorator to temporarily remove the handler whilst the test is being executed:: @unittest.removeHandler def test_signal_handling(self): ... .. versionadded:: 2.7