# -*- makefile -*- # The file Setup is used by the makesetup script to construct the files # Makefile and config.c, from Makefile.pre and config.c.in, # respectively. The file Setup itself is initially copied from # Setup.dist; once it exists it will not be overwritten, so you can edit # Setup to your heart's content. Note that Makefile.pre is created # from Makefile.pre.in by the toplevel configure script. # (VPATH notes: Setup and Makefile.pre are in the build directory, as # are Makefile and config.c; the *.in and *.dist files are in the source # directory.) # Each line in this file describes one or more optional modules. # Comment out lines to suppress modules. # Lines have the following structure: # # ... [ ...] [ ...] [ ...] # # is anything ending in .c (.C, .cc, .c++ are C++ files) # is anything starting with -I, -D, -U or -C # is anything ending in .a or beginning with -l or -L # is anything else but should be a valid Python # identifier (letters, digits, underscores, beginning with non-digit) # # (As the makesetup script changes, it may recognize some other # arguments as well, e.g. *.so and *.sl as libraries. See the big # case statement in the makesetup script.) # # Lines can also have the form # # = # # which defines a Make variable definition inserted into Makefile.in # # Finally, if a line contains just the word "*shared*" (without the # quotes but with the stars), then the following modules will not be # included in the config.c file, nor in the list of objects to be # added to the library archive, and their linker options won't be # added to the linker options, but rules to create their .o files and # their shared libraries will still be added to the Makefile, and # their names will be collected in the Make variable SHAREDMODS. This # is used to build modules as shared libraries. (They can be # installed using "make sharedinstall", which is implied by the # toplevel "make install" target.) (For compatibility, # *noconfig* has the same effect as *shared*.) # # In addition, *static* reverses this effect (negating a previous # *shared* line). # NOTE: As a standard policy, as many modules as can be supported by a # platform should be present. The distribution comes with all modules # enabled that are supported by most platforms and don't require you # to ftp sources from elsewhere. # Some special rules to define PYTHONPATH. # Edit the definitions below to indicate which options you are using. # Don't add any whitespace or comments! # Directories where library files get installed. # DESTLIB is for Python modules; MACHDESTLIB for shared libraries. DESTLIB=$(LIBDEST) MACHDESTLIB=$(BINLIBDEST) # NOTE: all the paths are now relative to the prefix that is computed # at run time! # Standard path -- don't edit. # No leading colon since this is the first entry. # Empty since this is now just the runtime prefix. DESTPATH= # Site specific path components -- should begin with : if non-empty SITEPATH= # Standard path components for test modules TESTPATH= # Path components for machine- or system-dependent modules and shared libraries MACHDEPPATH=:plat-$(MACHDEP) # Path component for the Tkinter-related modules # The TKPATH variable is always enabled, to save you the effort. TKPATH=:lib-tk COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(TKPATH) PYTHONPATH=$(COREPYTHONPATH) # The modules listed here can't be built as shared libraries for # various reasons; therefore they are listed here instead of in the # normal order. # This only contains the minimal set of modules required to run the # setup.py script in the root of the Python source tree. posix posixmodule.c # posix (UNIX) system calls _sre _sre.c # Fredrik Lundh's new regular expressions # The signal module can't be compiled as a dynamically linked module. signal signalmodule.c # signal(2) # The rest of the modules listed in this file are all commented out by # default. Usually they can be detected and built as dynamically # loaded modules by the new setup.py script added in Python 2.1. If # you're on a platform that doesn't support dynamic loading, want to # compile modules statically into the Python binary, or need to # specify some odd set of compiler switches, you can uncomment the # appropriate lines below. # ====================================================================== # The SGI specific GL module: GLHACK=-Dclear=__GLclear #gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 # Pure module. Cannot be linked dynamically. # -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE #WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE #PURE_INCLS=-I/usr/local/include #PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs #pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) # Uncommenting the following line tells makesetup that all following # modules are to be built as shared libraries (see above for more # detail; also note that *static* reverses this effect): #*shared* # GNU readline. Unlike previous Python incarnations, GNU readline is # now incorporated in an optional module, configured in the Setup file # instead of by a configure script switch. You may have to insert a # -L option pointing to the directory where libreadline.* lives, # and you may have to change -ltermcap to -ltermlib or perhaps remove # it, depending on your system -- see the GNU readline instructions. # It's okay for this to be a shared library, too. #readline readline.c -lreadline -ltermcap # Modules that should always be present (non UNIX dependent): #array arraymodule.c # array objects #cmath cmathmodule.c # -lm # complex math library functions #math mathmodule.c # -lm # math library functions, e.g. sin() #struct structmodule.c # binary structure packing/unpacking #time timemodule.c # -lm # time operations and variables #operator operator.c # operator.add() and similar goodies #_weakref _weakref.c # basic weak reference support #_codecs _codecsmodule.c # access to the builtin codecs and codec registry #_test _testmodule.c # Python C API test module #unicodedata unicodedata.c unicodedatabase.c # static Unicode character database #ucnhash ucnhash.c # Unicode Character Name expansion hash table #_locale _localemodule.c # access to ISO C locale support # Modules with some UNIX dependencies -- on by default: # (If you have a really backward UNIX, select and socket may not be # supported...) #fcntl fcntlmodule.c # fcntl(2) and ioctl(2) #pwd pwdmodule.c # pwd(3) #grp grpmodule.c # grp(3) #errno errnomodule.c # posix (UNIX) errno values #select selectmodule.c # select(2); not on ancient System V # Memory-mapped files (also works on Win32). #mmap mmapmodule.c # Dynamic readlines #xreadlines xreadlinesmodule.c # for socket(2), without SSL support. #_socket socketmodule.c # Socket module compiled with SSL support; you must comment out the other # socket line above, and possibly edit the SSL variable: #SSL=/usr/local/ssl #_socket socketmodule.c \ # -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ # -L$(SSL)/lib -lssl -lcrypto # The crypt module is now disabled by default because it breaks builds # on many systems (where -lcrypt is needed), e.g. Linux (I believe). # # First, look at Setup.config; configure may have set this for you. #crypt cryptmodule.c # -lcrypt # crypt(3); needs -lcrypt on some systems # Some more UNIX dependent modules -- off by default, since these # are not supported by all UNIX systems: #nis nismodule.c -lnsl # Sun yellow pages -- not everywhere #termios termios.c # Steen Lumholt's termios module #resource resource.c # Jeremy Hylton's rlimit interface # Multimedia modules -- off by default. # These don't work for 64-bit platforms!!! # These represent audio samples or images as strings: #audioop audioop.c # Operations on audio samples #imageop imageop.c # Operations on images #rgbimg rgbimgmodule.c # Read SGI RGB image files (but coded portably) # The md5 module implements the RSA Data Security, Inc. MD5 # Message-Digest Algorithm, described in RFC 1321. The necessary files # md5c.c and md5.h are included here. #md5 md5module.c md5c.c # The sha module implements the SHA checksum algorithm. # (NIST's Secure Hash Algorithm.) #sha shamodule.c # The mpz module interfaces to the GNU Multiple Precision library. # You need to ftp the GNU MP library. # The GMP variable must point to the GMP source directory. # This was originally written and tested against GMP 1.2 and 1.3.2. # It has been modified by Rob Hooft to work with 2.0.2 as well, but I # haven't tested it recently. # A compatible MP library unencombered by the GPL also exists. It was # posted to comp.sources.misc in volume 40 and is widely available from # FTP archive sites. One URL for it is: # ftp://gatekeeper.dec.com/.b/usenet/comp.sources.misc/volume40/fgmp/part01.Z #GMP=/ufs/guido/src/gmp #mpz mpzmodule.c -I$(GMP) $(GMP)/libgmp.a # SGI IRIX specific modules -- off by default. # These module work on any SGI machine: # *** gl must be enabled higher up in this file *** #fm fmmodule.c $(GLHACK) -lfm -lgl # Font Manager #sgi sgimodule.c # sgi.nap() and a few more # This module requires the header file # /usr/people/4Dgifts/iristools/include/izoom.h: #imgfile imgfile.c -limage -lgutil -lgl -lm # Image Processing Utilities # These modules require the Multimedia Development Option (I think): #al almodule.c -laudio # Audio Library #cd cdmodule.c -lcdaudio -lds -lmediad # CD Audio Library #cl clmodule.c -lcl -lawareaudio # Compression Library #sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11 # Starter Video # The FORMS library, by Mark Overmars, implements user interface # components such as dialogs and buttons using SGI's GL and FM # libraries. You must ftp the FORMS library separately from # ftp://ftp.cs.ruu.nl/pub/SGI/FORMS. It was tested with FORMS 2.2a. # NOTE: if you want to be able to use FORMS and curses simultaneously # (or both link them statically into the same binary), you must # compile all of FORMS with the cc option "-Dclear=__GLclear". # The FORMS variable must point to the FORMS subdirectory of the forms # toplevel directory: #FORMS=/ufs/guido/src/forms/FORMS #fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl # SunOS specific modules -- off by default: #sunaudiodev sunaudiodev.c # Linux specific modules -- off by default: #linuxaudiodev linuxaudiodev.c # George Neville-Neil's timing module: #timing timingmodule.c # The _tkinter module. # # The command for _tkinter is long and site specific. Please # uncomment and/or edit those parts as indicated. If you don't have a # specific extension (e.g. Tix or BLT), leave the corresponding line # commented out. (Leave the trailing backslashes in! If you # experience strange errors, you may want to join all uncommented # lines and remove the backslashes -- the backslash interpretation is # done by the shell's "read" command and it may not be implemented on # every system. # *** Always uncomment this (leave the leading underscore in!): # _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \ # *** Uncomment and edit to reflect where your Tcl/Tk headers are: # -I/usr/local/include \ # *** Uncomment and edit to reflect where your X11 header files are: # -I/usr/X11R6/include \ # *** Or uncomment this for Solaris: # -I/usr/openwin/include \ # *** Uncomment and edit for Tix extension only: # -DWITH_TIX -ltix4.1.8.0 \ # *** Uncomment and edit for BLT extension only: # -DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \ # *** Uncomment and edit for PIL (TkImaging) extension only: # (See http://www.pythonware.com/products/pil/ for more info) # -DWITH_PIL -I../Extensions/Imaging/libImaging tkImaging.c \ # *** Uncomment and edit for TOGL extension only: # -DWITH_TOGL togl.c \ # *** Uncomment and edit to reflect where your Tcl/Tk libraries are: # -L/usr/local/lib \ # *** Uncomment and edit to reflect your Tcl/Tk versions: # -ltk8.0 -ltcl8.0 \ # *** Uncomment and edit to reflect where your X11 libraries are: # -L/usr/X11R6/lib \ # *** Or uncomment this for Solaris: # -L/usr/openwin/lib \ # *** Uncomment these for TOGL extension only: # -lGL -lGLU -lXext -lXmu \ # *** Uncomment for AIX: # -lld \ # *** Always uncomment this; X11 libraries to link with: # -lX11 # Lance Ellinghaus's modules: #rotor rotormodule.c # enigma-inspired encryption #syslog syslogmodule.c # syslog daemon interface # Curses support, requring the System V version of curses, often # provided by the ncurses library. e.g. on Linux, link with -lncurses # instead of -lcurses; on SunOS 4.1.3, insert -I/usr/5include # -L/usr/5lib before -lcurses). # # First, look at Setup.config; configure may have set this for you. #_curses _cursesmodule.c -lcurses -ltermcap # Wrapper for the panel library that's part of ncurses and SYSV curses. #_curses_panel _curses_panel.c -lpanel -lncurses # Tommy Burnette's 'new' module (creates new empty objects of certain kinds): #new newmodule.c # Generic (SunOS / SVR4) dynamic loading module. # This is not needed for dynamic loading of Python modules -- # it is a highly experimental and dangerous device for calling # *arbitrary* C functions in *arbitrary* shared libraries: #dl dlmodule.c # Modules that provide persistent dictionary-like semantics. You will # probably want to arrange for at least one of them to be available on # your machine, though none are defined by default because of library # dependencies. The Python module anydbm.py provides an # implementation independent wrapper for these; dumbdbm.py provides # similar functionality (but slower of course) implemented in Python. # The standard Unix dbm module has been moved to Setup.config so that # it will be compiled as a shared library by default. Compiling it as # a built-in module causes conflicts with the pybsddb3 module since it # creates a static dependency on an out-of-date version of db.so. # # First, look at Setup.config; configure may have set this for you. #dbm dbmmodule.c # dbm(3) may require -lndbm or similar # Anthony Baxter's gdbm module. GNU dbm(3) will require -lgdbm: # # First, look at Setup.config; configure may have set this for you. #gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm # Berkeley DB interface. # # This requires the Berkeley DB code, see # ftp://ftp.cs.berkeley.edu/pub/4bsd/db.1.85.tar.gz # # Edit the variables DB and DBPORT to point to the db top directory # and the subdirectory of PORT where you built it. # # (See http://electricrain.com/greg/python/bsddb3/ for an interface to # BSD DB 3.x.) # Note: If a db.h file is found by configure, bsddb will be enabled # automatically via Setup.config.in. It only needs to be enabled here # if it is not automatically enabled there; check the generated # Setup.config before enabling it here. #DB=/depot/sundry/src/berkeley-db/db.1.85 #DBPORT=$(DB)/PORT/irix.5.3 #bsddb bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a # David Wayne Williams' soundex module (obsolete -- this will disappear!) #soundex soundex.c # Helper module for various ascii-encoders #binascii binascii.c # Fred Drake's interface to the Python parser #parser parsermodule.c # Digital Creations' cStringIO and cPickle #cStringIO cStringIO.c #cPickle cPickle.c # Lee Busby's SIGFPE modules. # The library to link fpectl with is platform specific. # Choose *one* of the options below for fpectl: # For SGI IRIX (tested on 5.3): #fpectl fpectlmodule.c -lfpe # For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2): # (Without the compiler you don't have -lsunmath.) #fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm # For other systems: see instructions in fpectlmodule.c. #fpectl fpectlmodule.c ... # Test module for fpectl. No extra libraries needed. #fpetest fpetestmodule.c # Andrew Kuchling's zlib module. # This require zlib 1.1.3 (or later). # See http://www.cdrom.com/pub/infozip/zlib/ #zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz # Interface to the Expat XML parser # # Expat is written by James Clark and must be downloaded separately # (see below). The pyexpat module was written by Paul Prescod after a # prototype by Jack Jansen. # # The Expat dist includes Windows .lib and .dll files. Home page is at # http://www.jclark.com/xml/expat.html, the current production release is # always ftp://ftp.jclark.com/pub/xml/expat.zip. # # EXPAT_DIR, below, should point to the expat/ directory created by # unpacking the Expat source distribution. # # Note: the expat build process doesn't yet build a libexpat.a; you can # do this manually while we try convince the author to add it. To do so, # cd to EXPAT_DIR, run "make" if you have not done so, then run: # # ar cr libexpat.a xmltok/*.o xmlparse/*.o # #EXPAT_DIR=/usr/local/src/expat #pyexpat pyexpat.c -I$(EXPAT_DIR)/xmlparse -L$(EXPAT_DIR) -lexpat # Example -- included for reference only: # xx xxmodule.c